ENGLISh Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the in- formation they contain. Table of contents 1. Getting to know your device .............. 9 2.
Getting to know your device The Beurer FC 95 facial brush offers gentle, thorough cleansing of facial skin. The facial brush not only cleanses facial skin, it also improves circulation. The facial brush provides both a circular and an oscillating rotation for a thorough and deep cleansing.
Intended use The device is only to be used on the human face (apart from the eye area). Do not use the facial brush on animals. The device is not suitable for children under 8 years. The device is only intended for the purpose described in these instructions for use. The manufacturer is not liable for damage resulting from improper or careless use.
Initial use 7.1 Charging the device Charge the device for at least 6 hours before initial operation. To do this, proceed as follows: 1. Insert the mains cable into the charger. 2. Insert the mains adapter into the socket. 3. Insert the facial brush into the charger from above. While charging is in progress, the LED lights for the ON/OFF/speed button light up alternately in a circle.
Cleaning 9.1 Cleaning the brush attachments IMPORTANT Before beginning cleaning, pull the brush attachment up and off. • Clean the brush attachment thoroughly with water after each use. 9.2 Cleaning the device and the charger • Only clean the appliance in the manner specified. •...
12. Troubleshooting Problem Solution Ensure that the charger is connected to a functioning socket and that the device is The device does not charge. correctly positioned on the charger. If you have connected everything correctly and the device still fails to charge, contact Customer Services. When switching on, ensure that you press the ON/OFF button with sufficient force and hold the button down for a sufficient amount of time.
Need help?
Do you have a question about the FC 95 and is the answer not in the manual?
Questions and answers