Clock/Timer; Clock Setting; Timer Setting; Activating And Deactivating Timer - Philips Docking Entertainment System BTM630 User Manual

Clock setting

The clock can be set in either 12-hour or
24-hour mode (12HR or 24HR for example).
1
In standby mode, press PROG on the system
(or PROG/CLOCK on the remote control).
➜ SET CLOCK is displayed briefly. Then,
or 24HR is
displayed.
2
Press ALBUM • PRESET +/- on the system
(or 3 / 4 on the remote control)
mode. Press PROG on the system (or PROG/
CLOCK on the remote control)
➜
The clock digits for the hours continue to
flash.
3
Press ALBUM • PRESET +/- on the system
(or 3 / 4 on the remote control) to set the
hours.
4
Press PROG on the system (or PROG/
CLOCK on the remote control) again.
➜
5
Press
(or 3 / 4 on the remote control) to set the
minutes.
6
Press PROG on the system (or PROG/
CLOCK on the remote control) to confirm the
time.

Timer setting

●
The system can be used as an alarm clock,
whereby the DISC (CD)/TUNER (FM/AM)/
DOCK (iPod)/USB/CARD (SD/MMC) is
switched on at a set time (one time operation).
The clock time needs to be set first before the
timer can be used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER for more than
two seconds.
2
Press SOURCE on the system repeatedly (or
the respective source keys on the remote
control) to select the sound source.
➜
displayed.
3
Press TIMER to confirm your desired mode.
➜
4
Press
(or 3 / 4on the remote control) to set the
hours.
5
Press TIMER again.
➜
6
Press
12HR
(or 3 / 4 on the remote control) to set the
minutes.
7
Press TIMER to confirm the time.
➜
to select clock
to confirm.

Activating and deactivating timer

●
In standby or during playback, press TIMER
once on the remote control.
➜
deactivated.

Clock/Timer

The clock digits for the minutes flash.
ALBUM • PRESET +/- on the system
"SET TIMER" and "SELECT SOURCE" are
The clock digits for the hours flash.
ALBUM • PRESET +/- on the system
The clock digits for the minutes flash.
ALBUM • PRESET +/- on the system
The timer is now set and activated.
Display shows if activated, and disappears if
27