Clock/Timer/Sleep; Clock Setting; Setting The Alarm Time; Stopping The Alarm - Philips DC570/98 User Manual

Clock/Timer/Sleep

POWER
USB
SHUFFLE
REPEAT
ALBUM/
PRESET
DBB
SLEEP

Clock setting

The clock uses the 24-hour mode.
1
In standby mode, press PROG/SET TIME for
more than two seconds.
➜
The clock digits flash.
2
Press / to set the minutes.
S T
3
Press TUNING -/+ to set the hours.
4
Press PROG/SET TIME to confirm the time.
Setting the timer
You can only set timer in standby mode.
Wake up to FM radio or music from your USB
device or iPod. The clock time needs to be set
first before the alarm clock can be used.
1
Press TIMER for more than 3 seconds to enter
the alarm setting mode.
➜
appears.
➜
The alarm clock digits flash.
➜
"Err" appears briefly if you have not set the
clock time.
18
TUNER
TUNING +
TUNING
MENU AUX
TIMER PROG
SET TIME
DSC
VOL
MUTE
2
Press TUNING +/- to set the hours.
3
Press / to set the minutes.
S T
4
Press iPod, TUNER or USB to select the
sound source.
5
Press TIMER to confirm your alarm setting.
➜
The display returns to the clock time.
Notes:
The TUNER mode is the default source if:
– Your USB device contains no MP3 or WMA files.
– You forgot to connect a USB device.
– You forgot to dock your iPod.

Stopping the alarm

●
To cancel the alarm, press TIMER in standby or
playback mode.
➜
appears if activated, and disappears if
deactivated.

Sleep timer setting

The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
➜
The selections are as follows (time in
minutes):
120 ™ 90 ™ 60 ™ 30™ 15 ™OFF...
➜SLEEP is displayed.
2
To review the remaining sleep time, press
SLEEP .
Note:
– If you press SLEEP again, this will change your
sleep time period to the next shorter preset option.
To deactivate the sleep timer
●
Press SLEEP repeatedly until "0FF" is displayed,
or press Power.