Clock; Time Setting - Philips AZT9230 User Manual

CLOCK

Time setting

Your player has a built-in clock. However, CD or tuner
play does not depend on the time setting.
1 Keep SET· pressed for approximately 2 seconds.
The clock digits 12:OO flash.
y
2 Keep 3 or 4 pressed, then briefly press 3 or 4
again repeatedly within 5 seconds to set the
current time.
The current time is displayed.
y
3 Press SET· three times or do not press any key for
5 seconds.
The current time is set and the time display
y
goes off.
• To switch to the clock display during CD or tuner play,
press CLOCK.
The current time is displayed for 5 seconds.
y
Notes: – When the player is supplied by batteries
do not remove the batteries during radio play,
otherwise time settings will be lost
and will have to be readjusted.
– If the power supply is interrupted for longer than
1 minute, all time settings will be lost and will have
to be readjusted.
22