Table of Contents
Advertisement
*1 Element: Length / static data/ non-conversion variable / conversion variable / check code / non-verified reception
Set the packet in the packet setting screen displayed by the following operation of GX Works3.
Protocol setting screen Desired packet setting
Window
The setting item of above screen is follows.
Item
Description
Protocol No.
Displays the protocol number of the selected protocol.
Protocol Name
The protocol name of the selected protocol.
Protocol Type
The protocol type of the selected protocol. (Send packet
or receive packet)
Packet Name
The packet name of the selected packet.
■List of elements
Element No.
These numbers indicate the order of elements. When
any element number is changed, the elements are
arranged in the numerical order.
Element Type
The type of each element is displayed. For details, refer
to the subsequent section of each element.
• Header
• Terminator
■Data area
• Length
• Static Data
• Non-conversion Variable
• Conversion Variable
• Check Code
• Non-verified reception
Element Name
Displays the element name.
Element Setting
The setting of each element is displayed. Click an item
to display each setting window.
: Necessity, : Not necessity
*1 These items can be set when the project is changed to an editable project on the protocol setting screen.
Setting requirement
Predefined
User
Add New
Protocol
Protocol
Library
Library
*1
7 PREDEFINED PROTOCOL SUPPORT FUNCTION
Setting range
Arbitrarily (32 characters)
1 to 32
Arbitrarily (32 characters)
199
7.7 Packet Setting
7
Advertisement
Table of Contents
Troubleshooting
