Table of Contents
Advertisement
L
OG
It is possible to search the log for previous QSOs with a particular station. When a log entry of interest is found, you may
edit the information on that line, if you like.
1. Referring to the Figure
sired callsign into the "CALL" field.
2. Press the [ KEY4 ( CHECK )] key to show a list of any
previous QSOs with the specified station within the
current log. Any previous QSOs will appear on a
"CHECK MODE" list.
3. Use the [ KEY1 ( )] , [ KEY2 ( )] , [ KEY3 ( )] , and
[ KEY4 ( )] keys to scroll through the data on the
"CHECK MODE" list.
M
ANUAL
R
EFERENCE
[ KEY1 ( xxx )]
[ KEY2 ( xxx )]
[ KEY3 ( xxx )]
[ KEY4 ( xxx )]
[ KEY5 ( xxx )]
[ KEY6 ( xxx )]
[ KEY7 ( xxx )]
[ KEY8 ( xxx )]
Quick Point: In the Step 2 above, before doing a check for a duplicate QSO, a copy is made of the QSO record, and you
may then do editing of that record. Use the [ KEY1 ( )] , [ KEY2 ( )] , [ KEY3 ( )] , and [ KEY4 ( )] keys to select an item
from among "CALL," "RST," "BAND," "MODE," and "REM;" when you press the [ KEY5 ( ONLY THIS )] key you'll
copy only that item. When you press the [ KEY7 ( EXIT )] key, the display image changes to what you see on page 31; press
the keyboard's [ ENTER ] key to do a duplicate check, and press the [ ENTER ] key once more to return to the log input
page and copy the data.
If you select a line of data using the [ KEY1 ( )] and [ KEY2 ( )] keys, pressing the [ KEY6 ( ALL SELECT )] key fol-
lowed by [ KEY7 ( ENTER )] key will cause the display image to change to what you see on page 31, and you may now
press the keyboard's [ ENTER ] key to do a duplicate check. Press the [ ENTER ] key once more to return to the log input
page and copy the data to that page (however, the "NUMBER," "RST," "BAND," and "MODE" data will not be copied).
Previously-entered log data may be edited later, if desired.
1. Referring to Figure
[ KEY2 ( )] or [ KEY3 ( )] key to select the log data
to be edited, then press the [ KEY4 ( EDIT )] key to open
the "EDIT MODE" list.
2. Now you may use the arrow keys on your keyboard to
move the highlighted area through the log.
3. Use the keyboard to change data within the currently
highlighted area.
4. Press the [ KEY4 ( RECORD )] key when you are fin-
ished editing, to save the entries you have worked on.
If you do not wish to save your changes, press the
[ KEY5 ( UN-RECORD )] key instead.
Advice: Data may easily be deleted, if you make a mis-
take, enter duplicate data accidentally, etc.
To erase data, use steps 1 and 2 above to select the data to
be erased. Then press the keyboard [ ESC ] key; the data
will be deleted. Press [ KEY4 ( RECORD )] to return to the
screen depicted on page 34 and end this procedure.
DMU-2000 D
M
ATA
B
P
OOK
REVIOUS
on page 31, enter the de-
FT-950
FT-2000
FT
5000
FT-2000D
DX
[ 1.8 ( 1 )]
[ F1 ( CH-1 )]
[ 3.5 ( 2 )]
[ F2 ( CH-2 )]
[ 7 ( 3 )]
[ F3 ( CH-3 )]
[ 10 ( 4 )]
[ F4 ( CH-4 )]
[ 14 ( 5 )]
[ F5 ( MEM )]
[ 18 ( 6 )]
[ F6 ( DEC )]
[ 21 ( 7 )]
[ F7 ( P.BACK )]
[ 24.5 ( 8 )]
[ DISPLAY ]
E
L
DITING
on page 31, press the
U
ANAGEMENT
NIT
L
B
OG
-QSO C
HECK
B
E
OG
OOK
NTRIES
F
OOK
UNCTION
( CHECK )
"C
M
" L
HECK
ODE
IST
"E
M
" L
DIT
ODE
IST
Page 35
Hide quick links:
Advertisement
Table of Contents
