Advertisement
A new window will open. In the top left corner is Wi-Fi:
Click on that and connect to your wifi network.
same network that the CAT is connected to.
3) Hardware Connection of router and Android Tablet
Before you start this section you need to ensure that the CAT is powered on and is
connected to 1534 MKII DAC with a CAD USB Cable. Ensure that the DAC is plugged into
power.
Connect the CAT directly to the wifi router using Ethernet cable.
To be able to import CDs and download the album cover art work, track names , etc
(Metadata) you must connect the Netgear router to the internet. This is done by
connecting your home router to the yellow Internet port shown above with an Ethernet
cable. If that is not possible (your router is too far away) please speak to your dealer for
other options.
A good way to make sure that the Tablet is connected to the CAT is to use the Fing
application on your tablet.. Fing will allow you to see all devices that are connected to
the same network that your Android Tablet is using. It will also give you the IP Address of
the CAT which can be useful in setup.
Run Fing now, you should see a screen similar to this:
In the screen shot above:
THE_CAD_CAT is the CAT
My Phone is the Android tablet
This confirms that the CAT and the Android Tablet are connected on the same network
(CAD) and that BubbleDS Next can control music playback of the CAT.
This wifi network must be the
Advertisement
