Related Manuals for Hanlong Unicorn 3002
Summary of Contents for Hanlong Unicorn 3002
-
Page 1: User Manual
User Manual Unicorn 3002 Analog Telephone Adaptor Hanlong Technology Co., Ltd http://www.hanlongtek.com http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002... -
Page 2: Table Of Contents
Configuring Unicorn 3002 using Web Browser..........11 6.1.1. Accessing the Web Configuration ............12 6.1.2. Programming Unicorn 3002 via the LAN Port ........12 6.1.3. Programming Unicorn 3002 via the WAN Port ........12 6.1.4. User Programming and Configuration ..........13 6.1.5. -
Page 3: Welcome
Unicorn 3002 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability. The Unicorn 3002 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market. -
Page 4: Hardware Specification
The Unicorn 3002 VoIP functionalities are available via regular analog telephones. Unicorn 3002 has two FXS ports. The PHONE1 port next to the LAN is FXS port 1 and the PHONE2 on the side of the Unicorn 3002 is FXS port 2. Each FXS port can have a separate SIP account. -
Page 5: Safety
¾ Connect another standard touch-tone analog telephone (or fax machine) to PHONE2 port. ¾ Insert the Ethernet cable into the WAN port of Unicorn 3002 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.) ¾... -
Page 6: Basic Operations
BASIC OPERATIONS 5.1. Get Familiar with Voice Prompt Unicorn 3002 has stored a voice prompt menu for quick access to settings and simple configuration. You can enter this voice prompt menu two ways: ¾Pick up the receiver (or press the Handsfree button) of the analog telephone and press “***”,... -
Page 7: Make Phone Call
IP address. Once all of the digits are collected, the input will be processed. ¾Incorrect keyed entry cannot be deleted or undone. The Unicorn 3002 will prompt you to start over by telling you that you made an error. -
Page 8: Call Waiting
1. Pick up the analog phone then access the voice menu prompt by dial “***” 2. Dial “47” to access the direct IP call menu 3. Enter the IP address using format ex. 192*168*0*160 after the dial tone. Copyright © 2008 Hanlong Technology Co., Ltd Page 8 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002... -
Page 9: Blind Transfer
INVITE and will try to recover the call. The busy tone is just to indicate to the transferor that the transfer has failed. Busy tone keeps playing. This means the Unicorn 3002 has failed to receive the second NOTIFY signal from the transferee and decided to time out. -
Page 10: Hunting Group
¾Party A can hang Note: When Attended Transfer failed and if party A hangs up, the Unicorn 3002 will ring party A again to remind party A that party B is still on the call, by pressing FLASH or Hook again will restore the conversation between party A and party B. -
Page 11: Fax
Preferred Codecs to be PCMU/PCMA. 5.5. Status Light Indicator Following tables show the Unicorn 3002 button light pattern indication. But the Button light Show the PHONE1 status only. Red light always indicates not normal status, Green light mostly indicate normal working status. -
Page 12: Accessing The Web Configuration
To program Unicorn 3002 via the LAN port, directly connect an Ethernet cable from your PC to the LAN port of the Unicorn 3002. After connecting the cable, confirm that the green light of the LAN port is on. If the green light is not on, this means that your PC is not yet properly connected to the Unicorn 3002 via the LAN port. -
Page 13: User Programming And Configuration
Unicorn3002 User Manual After enabling WAN access, be sure that the WAN port of the Unicorn 3002 is connected to an uplink (i.e. router, hub, switch, etc). Then, get the WAN IP address of the Unicorn 3002 by following section 5.1 of this user manual and selecting menu option 02. -
Page 14: Device Status
WAN IP Address feature, the PPPoE account settings need to be set. The Unicorn 3002 will attempt to establish a PPPoE session if any of the PPPoE fields have been entered with data. - If Static IP mode is enabled, then the IP address, Subnet... -
Page 15: Basic Options
This parameter controls whether the displayed time will be daylight savings time or not. If set to Yes, then the displayed time will be 1 hour ahead of normal time. Copyright © 2008 Hanlong Technology Co., Ltd Page 15 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002... - Page 16 Days) The time IP address are assigned to the LAN clients Forward all WAN IP traffic to a specific IP address if no DMZ IP: matching port is used by Unicorn 3002 itself or in the defined port forwarding Forwards a matching (TCP/UDP) port to a specific LAN IP...
-
Page 17: Super Options
“hole” on the NAT open. Default is 20 seconds. Minimum value is 20 seconds. Enables Unicorn3002 download firmware Firmware Upgrade configuration file through either the TFTP or HTTP and Provisioning: server. Copyright © 2008 Hanlong Technology Co., Ltd Page 17 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002... - Page 18 The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following components: GS_LOG: [device MAC address][error code] error message Example: 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Copyright © 2008 Hanlong Technology Co., Ltd Page 18 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002...
-
Page 19: End User Settings
End User Settings: Two FXS SIP accounts each has its own configuration page. Their configurations are identical. The following is a screen shot of FXS Port 1 Account settings. Copyright © 2008 Hanlong Technology Co., Ltd Page 19 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002... - Page 20 Default is No. If set to Yes the client will use DNS SRV for Use DNS SRV server lookup If the Unicorn 3002 has an assigned PSTN telephone User Phone number, this field should be set to “Yes”. Otherwise, set it to Number “No”.
- Page 21 5060. The default value for FXO port is 5062. This parameter defines the local RTP-RTCP port pair the Unicorn 3002 will listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will use this port Local RTP port _value for RTP and the port_value+1 for its RTCP;...
- Page 22 Default is No. No Key Entry Timeout Default is No. The Unicorn 3002 supports up to 7 different Vocoder types including G.711 A-/U-law È G.723.1, G.726, G.728, G.729A/B, iLBCÄpendingÅ. Depending on the product model, some of these Vocoders may not be provided in standard release.
- Page 23 SDP message of an INVITE request will be 20ms. If the configured voice frames per TX exceeds the maximum allowed value, the Unicorn 3002 will use and save the maximum allowed value for the corresponding first vocoder choice. The maximum value for PCM is 10(x10ms) frames;...
- Page 24 Default value is 98. Range is from 96 to 127. Type G726-24 Payload Default value is 99. Range is from 96 to 127. Type G726-40 Payload Default value is 103. Range is from 96 to 127. Type Copyright © 2008 Hanlong Technology Co., Ltd Page 24 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002...
- Page 25 2. Grammar: x - any digit from 0-9; Dial Plan a. xx+ - at least 2 digit number; b. ^ - exclude; c. [3-5] - any digit of 3, 4, or 5; Copyright © 2008 Hanlong Technology Co., Ltd Page 25 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002...
- Page 26 Default is No. If set to Yes, incoming calls with anonymous Caller Rejection ID will be rejected with 486 Busy message. Session Default is 180 seconds. Expiration Min-SE Default is 90 seconds. Caller Request Default is “NO”. Timer Copyright © 2008 Hanlong Technology Co., Ltd Page 26 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002...
- Page 27 Time period when the cradle is pressed (Hook Flash) to simulate FLASH. To prevent unwanted activation of the Hook Flash Timing Flash/Hold and automatic phone ring-back, adjust this time value. Copyright © 2008 Hanlong Technology Co., Ltd Page 27 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002...
-
Page 28: Saving The Configuration Changes
Once a change is made, users should click on the “SaveSet” button in the Configuration page, as follow: The Unicorn 3002 will then display the following screen to confirm that the changes have been saved. Please allow 5 to 10 seconds before rebooting the device. -
Page 29: Rebooting The Unicorn 3002
Unicorn 3002 User Manual 6.1.8. Rebooting the Unicorn 3002 You can reboot the Unicorn 3002 by clicking on the “Reboot” button after each update to the configuration page. Alternatively, you can reboot by unplugging the power supply of the Unicorn 3002 and then powering it on again. If your Unicorn 3002 ever becomes “stuck”... -
Page 30: Software Upgrade
To configure the TFTP server via the Web configuration interface, open up your browser to point at the IP address of the Unicorn 3002. Input the admin password to enter the configuration screen. From there, enter the TFTP server address in the designated field towards the bottom of the configuration screen. -
Page 31: Technical Support Contact
Unicorn 3002 User Manual d) Wait for 15 seconds. The device is now restored to the factory default setting. TECHNICAL SUPPORT CONTACT Email: Support@mail.hanlongtek.com Copyright © 2006 Hanlong Technology Co., Ltd Page 31 of 31 http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002...
Need help?
Do you have a question about the Unicorn 3002 and is the answer not in the manual?
Questions and answers