Advertisement
Customizing Labels
Setting the Format and Style (Edit menu)
You can decorate your label by setting the following.
MEMO
The setting items displayed when you press
differ depending on the label type you create.
Layout
Left, Center, Justify, Right
Adjusts the layout when multiple lines are used.
Frame & Table
Decorates the text with a frame or inserts a table.
Style
Outline, Normal, Shadow, S+O
Applies a character style to text.
Char. spacing
None, Narrow, Normal, Wide
Sets the inter-character spacing.
Border & Line
Strikeout, Underline, None, Border, Round brdr,
Shading, Brdr mesh, Round mesh
Applies border, underline, shade etc. to text.
Char. Width
Smaller, Small, Narrow, Normal, Wide
This allows you to change the width or height of
characters.
Bold & Italic
Italic, Normal, Bold, B+I
Changes the text in bold or italics.
Length
This setting is the same as when
is pressed.
"Setting the Label Length"
Margins
This setting is the same as when
is pressed.
"Setting the Margins"
Saving Frequently Used Labels
By saving frequently used labels, you will be able to easily recall and print from
them next time.
Up to 100 labels can be saved.
Saving a label
1. Press
.
2. Select " Save " with
/
and press
3. Select a registration number with
/
then press
.
The registration confirmation screen appears.
4. Confirm the registration number and then press
Recall the saved label
1. Press
.
2. Select " Recall " with
/
and press
3. Select a registration number with
/
then press
.
The recall confirmation screen appears.
4. Confirm the registration number and then press
Deleting the saved label
1. Press
.
2. Select " Delete" with
/
and press
3. Select a registration number with
/
then press
.
The deletion confirmation screen appears.
4. Confirm the registration number and then press
Orientation
AB A
,
Sets the orientation of the text.
AB A
Font size
This setting is the same as when
is pressed.
"Changing the Font Size"
Font
This setting is the same as when
+
"Changing the Font"
Procedure for setting
1. Place the cursor.
Place the cursor on the left of the characters to
which you want to apply a function.
If you apply the function to a specific line or block,
confirm that the cursor is in the line or block.
2. Press
.
Example: to apply "Bold & Italic"
3. Select "Bold & Italic" with
/
.
4. Select "B + I" with
/
and press
5. Select an area to which you want to apply the
function with
/
and press
When "Character" is selected, the function is applied
to all characters on the right of the cursor.
Utilizing Print Functions
Enlarge print
You can create a label that is larger than the width of a single label.
Print the created content separately on multiple labels and then put them
together to use as a single label.
.
or the number keys and
1. Press
2. Select " Enlarge print " with
3. Select " *2size " with
.
4. Select " 2/2 " with
5. Select " Start print? " with
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, select "Off".
.
or the number keys and
Mirror print
.
On
1. Press
2. Select " Mirror print " with
3. Select " On " with
.
4. Select " Start print? " with
or the number keys and
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, select "Off".
.
Print copies
1. Press
2. Select " Print copies " with
3. Enter the number of print copies and then press
4. Select " Start print? " with
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, set the
number of print copies to "1".
Changing the Font Size
You can change the font size of text or a block line by line. Among
the preset setting items, select one with the same number of
lines as that of the text or block you want to change.
MEMO
You may not be able to change the font size depending on the
label type you create.
1. Press
.
2. Each time you press
, the font size changes.
Changing the Font
Changes the font type of text.
1. Press
+
.
is pressed.
2. Each time you press
SansS.
Roman
Changing the Text Orientation
Changes the text orientation to vertical or horizontal.
MEMO
You may not be able to change the text orientation depending
on the label type you create.
and press
1. Press
+
.
.
Each time you press
+
between " Horizontal" and "Vertical".
.
Horizontal
Vertical
When creating "Patch Panel", "Block-66", "Faceplate", or
"Mix-Len"
1. Press
+
.
2. Select the orientation with
Hori.
Vert.1
Vert.2
+
+
.
/
and press
.
/
and press
.
/
and press
.
/
and press
.
Off
+
.
/
and press
.
/
and press
.
/
and press
.
+
.
/
and press
.
.
/
and press
.
Setting the Label Length
You can set the length of label or block.
MEMO
When creating a special label, you can set the length again.
Setting items for special label is displayed after pressing
1. Press
2. Select the setting method of the length with
/
Auto: Automatically adjusts the label length depending
Set: Sets the label length.
Setting range: 1 to 99.9 cm
+
3. Select the alignment for the text with
press
Left, Center, Justify, Right
+
, the font changes.
Setting the Margins
Sets the left and right margins.
MEMO
+
You may not be able to set the margins depending on the label
type you create.
1. Press
2. Select the type of margins with
, the setting switches
Adding Block
By dividing text into blocks, you can change the style and the
number of lines block-by-block.
Display
/
and press
.
1. Press
A new block is started from the character next to the
cursor.
Changing the Printer Settings
Auto cut
Auto cut:
Sets whether or not to cut automatically.
Half cut:
When "Auto cut" is set to "On", the function "Half cut" for precutting just the
label part to make the backing paper easy to peel off can be set.
Print density
Sets the print density.
Drop stop
This function is useful for affixing consecutively printed labels one at a time.
Select "On" to avoid a printed label from dropping. A printed label stays at the
tape eject slot.
When printing multiple copies, printing of the second or later labels starts each
time you remove a printed label.
This function is only available when the label length is 28 mm or more, "Auto
cut" is set to "On", and "Half cut" is set to "Off".
Backlight
Sets the display backlight to On or Off.
Language
You can select the language shown on the display from the following:
Dansk, Deutsch, English, Español, Français, Italiano, Nederlands, Norsk,
Português-Br, Português-EU, Suomi, Svenska, Türkçe
inch:cm
The unit of length used to indicate the label size can be switched between inch
and cm.
MEMO
Version: To make sure the version number that has been installed in the printer.
Procedure for setting
1. Press
+
.
2. Select the desired function with
3. Select the desired item with
.
.
and press
.
on the length of text.
/
and
.
.
/
and press
Label
Block 1
Block 2
.
+
/
and press
.
/
and press
.
.
Advertisement
