Transfer Files to a PC
To use AirCheck Manager to look at test sessions or profiles
that are saved on the tester
Install the latest version of AirCheck Manager software
1
on your PC. Start the software.
Turn on the tester.
2
Use the USB cable supplied with the tester to connect
3
the tester to the PC. The AirCheck pane shows session
files that are on the tester.
To use the PC operating system to transfer files
Turn on the tester.
1
Use the USB cable supplied with the tester to connect
2
the tester to the PC. The PC operating system shows the
tester as a disk drive.
Use the PC operating system to copy files from the
3
tester to a disk drive on the PC.
Maintenance
W
Warning
To prevent possible fire, electrical shock, personal
injury, or damage to the tester:
•
Do not open the case. You cannot repair or replace
parts in the case.
•
Use only replacement parts that are approved by
Fluke Networks.
•
If you replace parts that are not specified as
replacement parts, the warranty will not apply to
the product and you can make the product
dangerous to use.
•
Use only service centers that are approved by Fluke
Networks.
Maintenance
X
91