Initial Settings - JVC LT-32C31BJE Service Manual

Initial settings

When the TV is first turned on, it enters the initial setting
mode, and the JVC logo is displayed. Follow the
instructions on the on-screen display to make the initial
settings.
1 Make sure to set the VCR/TV/DVD switch to the
TV position.
• You cannot turn the TV on when the VCR/TV/DVD
switch is set to the VCR or DVD position.
2 Press the # # button on the remote control
# #
The TV turns on from standby mode and the JVC logo is
displayed.
• Check that the AC plug on the power cord from the
TV is connected to AC outlet.
• If the JVC logo does not appear this is because your
TV has already been turned on for the first time:
use the "LANGUAGE" and "AUTO PROGRAM"
functions to make the initial settings. For details, see
"INSTALL" on page 27.
VCR/TV/DVD
Switch
Yellow button
Blue button
Remote control
sensor
Power lamp
3 Press the a a button a a
The LANGUAGE menu appears.
LANGUAGE
BACK
TV OK
D0002(E)-EN
4 Press the 5 5 and 6 6 buttons to choose
5 5 6 6
ENGLISH. Then press the a
The on-screen display will then be in English.
The COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
There are two COUNTRY menus. Pressing the yellow
button changes the COUNTRY menu as follows:
BACK START BACK
TV OK TV OK
MORE
D0003-EN
5 Press the 5 5 and 6 6 buttons to choose the
5 5 6 6
country where you are
• For users in the UK:
To receive SKY 1 you need a satellite tuner. You
must have the satellite tuner set to SKY 1 before
starting the AUTO PROGRAM function which
follows.
6 Press the blue button to start the AUTO
PROGRAM function
The AUTO PROGRAM menu appears and received TV
channels are automatically stored in the programme
numbers (PR).
• To cancel the AUTO PROGRAM function:
Press the b button.
AUTO PROGRAM EDIT
PR ID
CH 10
AV
01 BBC1
02
20%
03
04
05
BACK
06
TV OK 07
08
09
BACK
TV OK
MOVE
D0004-EN
After the TV channels have been registered in
the programme numbers (PR), the EDIT menu
appears
• If you want to, you can now edit the programme
numbers (PR) using the EDIT/MANUAL function.
For details, see "EDIT/MANUAL" on page 28.
• If you do not want to edit programme numbers (PR),
go to the next step.
If "ACI START/ACI SKIP" appears in the AUTO
PROGRAM menu:
You can use the ACI (Automatic Channel Installation)
function to decode the ACI data and complete the
registration of all the TV channels quickly. For details of
the ACI function and how to use it, see "Using the ACI
function" on page 31.
If you don't want to use the ACI function, press the 6
buttons to an choose ACI SKIP and then press a.
a button
a a
START
MORE
CH / CC
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CC 01
CC 02
CC 03
ID
INSERT
DELETE
MANUAL
7