Philips PSD1211 User Manual page 22

ENGLISH
22
Problem
The Philips
BlueControl
suddenly
interrupts the
treatment and
slowly flashes blue.
The Philips
BlueControl is
switched off with
a long beep and
the LED indicator
flashes orange.
The LED indicator
lights up solid
orange when
I press the on/off
button.
Possible cause
The device
measured a
too high skin
temperature
and paused the
treatment to allow
the skin to cool
down.
The Philips
BlueControl was
interrupted too
many times during
treatment, for
instance because
the sensor sensed
a too high skin
temperature or
because maximum
treatment time of
40 minutes was
exceeded.
The device
temperature
is too high
and the Philips
BlueControl
switched off for
safety reasons.
Solution
No action required.
The treatment restarts
automatically after the device
measures a skin temperature
in the safe range.
If this happens a few times,
contact Philips.
Let the Philips BlueControl
cool down for 10 minutes.
Put the Philips BlueControl
back onto your skin and press
the on/off button to resume
treatment.