Advertisement
Specifications
Association
The Home Gateway supports 1 association group. Group 1 is assigned to the Lifeline association
group and can add max 1 association nodes. The Lifeline group is used to send Device Reset Locally
Command if a Factory Reset is done and there is a SIS in the network and the SIS is not this gateway.
Command Classes
Supported Command Classes
Z-WavePlusInfo, v.2
Version, v.2
ManufactureSpecific, v.1
DeviceResetLocally, v.1
AssociationGroupingInformation, v.3
Association, v.2
Security, v.1
ApplicationStatus, v.1
CRC16Encap, v.1
PowerLevel, v.1
MultiCommand, v.1
Time, v.1
TimeParameters, v.1
Basic Command Class
A Basic Set Command to the Gateway will be handled as a Basic Report from that device. Basic Get
command will be ignored.
Frequence
The Z-Wave use 868,4 Mhz which is approved in Albania, Andorra, Austria, Azerbaijan, Belarus,
Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Moldova, Monaco, Netherlands, Norway, Poland, Portugal, Romania, Russian
Federation, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Spain, Sweden, Switzerland,
The former Yugoslav Republic of Macedonia, Turkey, Ukraine, United Kingdom, Vatican, China,
Singapore, UAE and South Africa.
WeBeHome Quick Start Guide for WBH-HG2+EU, version 2.0, 2017-05-31
Controlled Command Classes
AlarmSensor, v.1
Assocation, v.2
AssocationGroupingInformation, v.3
Basic, v.1
Battery, v.1
BinarySensor, v.2
BinarySwitch, v.1
CentralScene, v.3
Clock, v.1
Configuration, v.1
CRC16, v.1
DeviceResetLocally, v.1
DoorLock, v.2
ManufactureSpecific, v.1
Meter, v.3
MultiCommand, v.1
MultiChannel, v.2
MultiChannelAssociation, v.3
MultilevelSensor, v.6
MultilevelSwitch, v.3
Notification, v.4
PowerLevel, v.1
PulseMeter
Security, v.1
ThermostatSetpoint, v.1
Time, v.1
Version, v.2
WakeUp, v.2
WindowCovering, v.1
Z-WavePlusInfo, v.2
Page 6
Advertisement
