Advertisement
The Home Gateway
LED Indicators
WiFi enabled
LAN cable
WeBeHome
Working
Power
connected
connected
The LAN cable LED should be lit or flashing to indicate that the gateway has a LAN connection. The
WiFi is disabled when the Home Gateway is paired.
The gateway use TCP port 80 and 443 to connect to WeBeHome. These ports needs to be open for
outgoing traffic and packet inspection turned off. In most cases no change needs to be done in the
router for this.
The Home Gateway may be mounted on the wall using the mounting plate.
For security reasons, the gateway should be placed behind a router/firewall.
WeBeHome Quick Start Guide for WBH-HG2+EU, version 2.0, 2017-05-31
Page 3
Advertisement
