Phottix Mitros Instruction Manual
Ttl flash for canon
Hide thumbs
Also See for Mitros:
- Instruction manual (13 pages) ,
- Instruction manual (147 pages) ,
- Instruction manual (134 pages)
Related Manuals for Phottix Mitros
Summary of Contents for Phottix Mitros
- Page 1 Phottix Mitros TTL Flash for Canon INSTRUCTION MANUAL BENUTZERHANDBUCH MANUEL D’UTILISATION MANUAL DE INSTRUCCIONES ISTRUZIONI D’USO INSTRUKCJA OBSŁUGI Simp Trad...
- Page 2 For advanced features please read this manual and be familiar with your camera Back / Left Side manual and operations. The Phottix Mitros TTL Flash for Canon is designed to work with Canon DSLR 1. LCD Display cameras and features ETTL I/II, Manual, Multi modes as well as Wireless Master/ 2.
-
Page 3: Installing Batteries
Using the Flash Head Di user lock engages with a click. The Phottix Mitros TTL Flash comes with an attachable di user that can be add- 4. To Unlock, press the locking release button on the locking lever and slide to ed to the front of the ash head when needed. - Page 4 INSTRUCTION MANUAL Overheating Protection The Phottix Mitros contains an overheating protection circuit that will slow ash recycle time to avoid overheating-related damage. Approximately 20 full-power ashes in a short amount of time will trigger this protection. A [ Hot! ] Icon will appear when the overheating protection circuit is in operation.
-
Page 5: The Lcd Display
1/1 – 1/128 (1 – 199) Hz A B C The LCD display on the Phottix Mitros ash contains important information re- In ETTL mode: HSS/SCS, FEB, EV garding ash settings and functions. In M mode: HSS/SCS, Group, Power Level... -
Page 6: Modeling Flash
The Phottix Mitros will remember ash settings. Mode, power levels, etc. will be To save battery power the Phottix Mitros TTL Flash is equipped with Idle and retained in the ash if it is turned o and then back on. -
Page 7: Flash Modes
Please note: - By default: FEB will be cancelled after three photos are taken. FEB can be set The Phottix Mitros has three ash modes: ETTL, Manual (M) and Multi (Strobo- in the Custom Functions screen (see C.Fn-03 below). scopic). - Page 8 This is a rough guideline: You may need to increase or decrease the shutter speed to get the desired result. In Manual Mode the ash will re at the power level you set. The Phottix Mitros TTL Flash can be adjusted from 1/1 (full power) to 1/128 – 8 stops of adjustments Multi Stroboscopic Mode Output Chart in 1/3rd stop increments.
-
Page 9: Wireless Settings
Master with Flash mode: The Master ash on the camera will re when a The Phottix Mitros can also be triggered as an Optical Slave (OS). In OS mode photo is taken. - Page 10 INSTRUCTION MANUAL ETTL Modes 3. Pressing the buttons will cycle between Master with ash, Master without ash, Slave, OS and O modes. A+B+C All three groups re at an average of the total calculated output. 4. Select Master with ash or Master without ash. A:BC Groups A and B can be set by Flash Ratio (see below).
-
Page 11: Custom Functions
INSTRUCTION MANUAL Custom Functions The Phottix Mitros TTL Flash comes with a number of programmable custom 3. Press the buttons to change the function within the menu. functions. To edit these functions (below): 4. Press the button to exit the C.Fn menu. - Page 12 Controlled slave groups: 3 (A, B, and C) Flash ratio control: 1:8-1:1-8:1 For technical support or rmware upgrade checking the Phottix Mitros infor- mation may be need. To display the hardware, software, icon library and serial Standby current: ≤100uA in sleep mode number display: Dimensions: (L x W x H): 202.8×77.5×58.3 mm...
- Page 13 90-105 Lodz, Poland KRS 0000327336 declare herewith that the product designated below: Product name: Phottix Mitros TTL Flash For Canon Model No.: FDT11TA complies with the relevant fundamental requirements as per EMC Directive 2004/108/EC, insofar as the product is used correctly, and the following stand-...