Sony RDR-GX330 Service Manual page 22

Channel AFT
Press M/m repeatedly until the programme
Select "On" to turn on AFT.
position you want is displayed.
On
The programme positions are scanned in the
order shown in the table below.
• If you know the number of the programme
position you want, press the number
Off
buttons. For example, for programme
position 5, first press "0" and then press
"5." • If the Auto Fine Tuning function does not
work effectively, select "Off" and press ,.
• To disable a programme position, enter
Press M/m to obtain a clearer picture, and
"00." The disabled programme positions
press <.
will be skipped when you press PROG +/–.
• To select a cable or satellite programme
position, press M/m until the programme
Receivable channels
position you want is displayed.
TV system
Name
BG
Changes or enters a new station name (up to • Malaysia,
Singapore,
5 characters). The recorder must receive
Thailand
programme position information (for
• Middle East
instance, SMARTLINK information) for
• Australia, New
station names to appear automatically.
Zealand
To enter characters, see page 29.
I
• Hong Kong
Audio
• South Africa
Select "NICAM" or "Standard."
NICAM Normally, select this.
Standard Select this if the sound from
NICAM broadcasts is not
clear.
For customers in Australia and New
Zealand
• Australia
Channel Set number Channel
C2
C3
C4
S44
S46
S1
Channel Sort Auto Programme Title Labelling
(TV Guide Page)
After the programme positions have been set,
you can change the order of each programme
Some broadcast systems provide a Teletext
position in the display list.
service* in which complete programmes and
1
their data (title, date, programme position,
Select "Channel Sort" in "Basic," and
recording start time, etc.) are stored day by
press ENTER.
day. A TV guide page corresponds to each
day of the week. When recording a
programme, the recorder automatically takes
the programme name from the Teletext pages
and stores it as the title name. The TV guide
page numbers depend entirely on the
broadcast itself and may be subject to change.
If so, you may have to set those TV guide
2 Press M/m to select the row containing page numbers manually in the TV Guide
Page menu.
the programme position you want to
* This feature mostly likely cannot be used because
move, and press ENTER.
it requires a service that is provided in limited
• To display other pages for programme
areas only.
positions 4 to 99, press M/m repeatedly.
1
3 Press M/m until the selected programme
position row moves to the desired
programme position.
2
The selected programme position is
inserted at the new programme position.
4
Press ENTER to confirm the setting.
5
To change the programme position of
another station, repeat from step 2.
Turns on the Auto Fine
Tuning function.
Normally, select this.
Allows you to adjust the
pictures manually.
Channel coverage
E2 – E12 VHF
A – H VHF
AS0 – AS12 VHF
NZ1 – NZ11 VHF
E21 – E69 UHF
AS28 – AS69 UHF
S1 – S20 CATV
S1 – S46 CATV
S21 – S41 HYPER
S01 – S05 CATV
A – J VHF
4 – 13 VHF
B21 – B69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
AS0
AS1
AS2
AS3
AS4
AS5
,
69
Select "TV Guide Page" in "Basic," and
press ENTER.
The TV Guide Page menu appears.
Select the programme position for which
you want to set or change the TV guide
page using PROG +/– or number buttons.
• The TV guide page numbers (Example:
P301) appear automatically when the
recorder detects them.
• If no page numbers are detected (P000),
you have to set the appropriate TV
guide page number manually.
,
71
Channel Set number Channel
S6 AS5A
C5 AS6
C6 AS7
C7 AS8
C8 AS9
C9 AS9A
C10 AS10
C11 AS11
C12 AS12
C28 AS28
C29 AS29
C30 AS30
C31 AS31
C31, C32 AS32
C32 AS33
C33 AS34
C34 AS35
C35 AS36
C36 AS37
C37 AS38
C38 AS39
C38, C39 AS40
C39 AS41
C40 AS42
C41 AS43
C42 AS44
C43 AS45
C44 AS46
C45 AS47
C45, C46 AS48
C46 AS49
C47 AS50
C48 AS51
C49 AS52
C50 AS53
C51 AS54
C52 AS55
70
3
Select the TV guide page number you
want to modify, and press ENTER.
4 Press the number buttons or </M/m/,
to enter the TV guide page number, and
press ENTER to confirm the setting.
• If you make a mistake, re-enter the
correct number.
• To return to the original settings, press
O RETURN.
5
To set or change another TV guide page
number, repeat steps 3 and 4 above.
z Hint
To view Teletext information on your TV screen
during a broadcast, switch to your TV's tuner by
pressing TV/DVD.
b
Notes
• In step 4 above, enter "000" if you do not want to
use the TV guide page number for automatic
labelling. The recorder will instead store a default
title name (programme position, start time - stop
time).
• Refer to the Teletext information on your TV
screen to obtain the TV guide page number with
programme titles and their start times.
• If the Teletext TV guide has a page which always
shows the programmes for the current day, this
page should be input for all days.
• If you start recording more than three minutes
before the programme is scheduled to start, the
correct label information may not be transferred.
• Note that this function may not work correctly
with programmes broadcast from some stations.
• If the broadcast system updates the Teletext
information at the moment recording starts, the
title label may not correspond to the recorded
programme. In this case, you may have to
manually enter the correct title (page 29).
72
1-17
RDR-GX220/GX330
Channel Set number Channel
C52, C53 AS56
C53 AS57
C54 AS58
C55 AS59
C56 AS60
C57 AS61
C58 AS62
C59 AS63
C59, C60 AS64
C60 AS65
C61 AS66
C62 AS67
C63 AS68
C64 AS69
S1 – S20 S1 – S20
• New Zealand
Channel Set number Channel
C2 NZ1
C3 NZ2
C4 NZ3
C5 NZ4
C6 NZ5
C7 NZ6
C8 NZ7
C9 NZ8
C10 NZ9
C11 NZ10
C12 NZ11
C21 – C69 E21 – E69
S1 – S46 S1 – S46
Clock
Auto Adjust (Auto Clock Set)
This function cannot be used in your area.
Present Time (Manual Clock Set)
Set the clock manually.
1
Select "Clock" in "Basic," and press
ENTER.
2
Select "Present Time," and press
ENTER.
3 Press M/m to set the day, and press ,.
Set the month, year, hour, and minutes in
sequence. Press </, to select the item
to be set, then press M/m to set the
numbers. The day of the week is set
automatically.
To change the numbers, press < to
return to the item to be changed, and
press M/m.
4
Press ENTER to start the clock.
OSD (On-Screen Display)
Switches the display language on the screen.