OSEE AURORA1600 User Manual page 14

Unpack and Installation
 If the original package is not available, you can supply your own
packaging as long as it meets the following criteria:
 The packaging must be able to withstand the product's weight.
 The product must be held rigid within the packaging
 There must be at least 5 cm of space between the product and the
container.
 The corners of the product must be protected.
Ship products back to us for servicing prepaid and, if possible, in the

original packaging material. If the product is still within the warranty
period, we will return the product prepaid after servicing.
Installation
Prepare for installation
1.
Make sure you have prepared the followings before mount the converter:
 Inspect for any apparent physical damage that may have occurred in
transit.
 Make sure you have received all the components listed in packing list.
 if there are any anti-static package or other packages, please take off
them.
 Keep the package in case of future usage.
 The safety matters or operations that user must pay attention to when using
this product.
 Ensure that all handling precautions are taken to avoid electrostatic
discharge or other damage to sensitive electronic components. Wear an
earth strap and perform all PCB assembly at an appropriate anti-static work
station. Follow the instructions carefully to fit the modules.
Install AURORA1600in your desired location of a standard EIA
2.
8