Aux send way 2 – to monitor the Aux send back control TRIM (4) or disengage button 1282USB. The model PMX-842USB has fewer way via the headphone output (23) and the LEVEL (5)] and / or turn back the equalizer mono input channels and does not have any CONTROL ROOM output (54);...
27 Level control for the total signal of the Aux 41 POWER LED equalizer) into the left and right master chan- send way 2 which is available at the output nels MAIN MIX 42 Indicating LED +48V: lights up with phantom AUX SEND 2 (21) as well as sent to the inter- plug connections: power switched on for the inputs MIC (1)
Via the Aux send ways 1 and 2, signal parts can minimum. be decoupled from the input channels, pro - The Powered Mixers PMX-842USB and PMX- cessed via an effect unit (e. g. reverb unit) and 4.1.2 Line audio sources...
BNC jack LAMP (24), e. g. the LED light GNL- 4) Press the button MODE (44) to select the – the sum signal ALT 3 – 4 204 from “img Stage Line”. The light is switched monitoring mode “PFL”, the green LED PFL – the sum signal MAIN MIX on and off together with the mixer.
the channel signal is displayed in mono 5) In the mono channels place the signals with the Return signal of an effect unit, to the mon- ahead of the fader (15) and the control PAN the panorama control PAN (10) in the stereo itor way.
LED CLIP of its level indication (32) lights up. add the effect signal with the left control for the Aux send way 2 the SOLO button next Then turn back accordingly the control AUX STEREO AUX RETURN 1 (35) to the to the control AUX SEND 2 (27).
Need help?
Do you have a question about the PMX-842USB and is the answer not in the manual?
Questions and answers