Bps; Log - JF TECH JRC-27F Manual

Tips： ○ means that the hard disk is normal. X means that the hard disk is broken-down.-
means that there is no hard disk. If the user needs to change the damaged hard disk,
you must shut down the DVR and take up all the damaged hard disks, then install a new
one.
* Behind serial number means the current working disk such as 1*. If the
corresponding disk is damaged, the information will show "？"
4.6.2

BPS

Display the code stream （Kb/S） and hard disk capability （MB/H） in real time. It displays
as the wave sketch map.
4.6.3

LOG

Figure 4.52HDD info
Figure 4.53 BPS