1. Manuals
  2. Brands
  3. JF TECH Manuals
  4. DVR
  5. JRC-27F
  6. Manual

JF TECH JRC-27F Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Digital Video Recorder

Manual
Version 1.1.0
JF TECH(Co.,Ltd)

Advertisement

Table of Contents
loading

Summary of Contents for JF TECH JRC-27F

  • Page 1: Digital Video Recorder

    Digital Video Recorder Manual Version 1.1.0 JF TECH(Co.,Ltd)
  • Page 2 Thanks for purchasing our products, if you have any questions or need, please feel free to contact us. The manual is the DVR product manuals, support functions due to the different models differ, please prevail in kind. This manual is intended for you as an operating system and programming reference tool. You can find information about the features and commands in this manual, as well as a detailed menu tree and Quick Start Guide.
  • Page 3 3. Avoid placing the device in direct sunlight place, or poorly ventilated location, or near a heat source such as a heater or heating, etc. (ignore this may cause a fire hazard). 4. In order to avoid damage to the DVR, do not have the DVR set up in smoke or steam, the temperature is too high or there is a lot of dust in the workplace.

  • Page 4: Table Of Contents

    Contents Introduction ..........................5 Product Brief ......................... 5 Main Functions ......................5 Unpacking and cable connection ....................7 Unpacking........................7 Hard disk installation ..................... 7 Shelf Installation ......................8 Front Panel ........................8 Rear panel ........................9 Audio & Video input and output connections ............10 Alarm input and output connections ................

  • Page 5: Introduction

    1. Introduction Product Brief The series Digital Video Recorder (hereinafter referred to as DVR) is designed especially for security and defense field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format which insures the high quality image, low coding ratio and single frame playing.
  • Page 6  Alarm linkage Alarm recording, round robin, the screen prompts, beep, mail, FTP  Communication interface With RS485 interface, alarm input and PTZ control With RS232 interface, scalable keyboard connection to the master, and connected to the computer serial port for system maintenance and upgrades, and matrix control With standard Ethernet interfaces, network remote access feature ...

  • Page 7: Unpacking And Cable Connection

    2. Unpacking and cable connection Unpacking When you receive the product: First, check whether the packaging equipment has obvious damage. Selection of protective packaging materials during transport can cope with most of the unexpected hit; Then, remove the device, remove the plastic protective film DVR, check whether there is any visible damage to the outside;...

  • Page 8: Shelf Installation

    ⑦cover the machine ⑧fix the cover Shelf Installation This product chassis specification is standard 1u, so it can be installed in the standard shelf. Installation steps and attention items: Make sure the temperature in the room lower then 35℃ (95°f). Keep the equipment has 15cm (6 inches) space around in order to air's circulation.

  • Page 9: Rear Panel

    Direction Menu 2.4.3 K Series/F Series Function Function Function Function Exit Mode Record indicator indicator Alarm PTZ Control Shift indicator indicator Menu Power IR Receiver Shift indicator Power Switch Next file Play Fast Play Last file Stop Null interface Jog wheel Direction CD-ROM switch...

  • Page 10: Audio & Video Input And Output Connections

    16ch DVR: Audio & Video input and output connections 2.6.1 video input DVR video input port to the BNC input signal requirements: PAL / NTSC BNC (1.0VP-P, 75Ω). Video signal should comply with national standards, a higher signal to noise ratio, low distortion, low interference;...

  • Page 11: Alarm Input And Output Connections

    the use of time and strictly controls the interference power caused by neighboring devices. Inferior TV leakage risks may cause damage to other equipment. 2.6.3 SDI video output Some models support coding for 1080P (720P) SDI video. 2.6.4 Audio input BNC connector (only one to support intercom function) Audio input impedance is high, and therefore must be used active pickups.
  • Page 12 E. AB line voltage between the decoder requires less than 5V. 2.7.4 Front-end device requires grounding Poor grounding may cause the chip to burn. 2.7.5 Any type of alarm input The alarm output unit interface is a normally open type. 8 external alarm interface schematic: (1) Alarm input 1,2,3,4 (2) Ground...

  • Page 13: Connect Line 485

    To avoid overload and damage the host, please refer to the relay relevant parameters when connecting relay relevant parameters Annex. 2.7.8 Alarm output Relay terminal parameters Model: JRC-27F Shock material Silver Rated switching capacity 30VDC 2A, 125VAC 1A...
  • Page 14 16 external alarm 485 Schematic...

  • Page 15: Basic Operations

    3. Basic Operations Note: The button is grayed means did not support. Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video output is multiple-window output mode.

  • Page 16: Preview

    permissions are preview and video playback. User password can be revised, while their permissions can’t be revised; user default is the default login user whose permission can be revised but not its password. Figure 3.1 Login Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked.
  • Page 17 Figure 3.2 shortcut menu 3.5.1 Main menu When you login, the system main menu is shown as below. Figure 3.3 main menu 3.5.2 Boot wizard Provide fast setup to wizard configuration parameters. Including boot wizard, two-dimensional code and digital channel configuration wizard, click “Next” to enter...
  • Page 18 the digital channel configuration wizard. Boot wizard: Figure 3.4 Boot wizard interface [Do not Display] select the highlighted ■ expressed after reboot, no longer automatically pop up boot wizard. [Next] enter the digital channel configuration wizard interface. [Cancel] to save the settings and exit this screen wizard interface. QR Code Figure 3.5 QR code interface...
  • Page 19 Figure 3.6 mode selection Click “Next” on the figure 3.4, will pop up APP and SN QR code, and then click next to pop up mode selection. Select the manual mode to enter the digital channel configuration wizard which as shown in Figure 3.7, you can set shortcuts for digital channels;...
  • Page 20 Figure 3.7 Digital Channel Configuration Wizards Label meanings: 1. Search protocol selection Includes three search methods, respectively NETIP, ONVIF, ALL 2. Search Search device 3. Add Add device 4. Network Settings The device can be set remotely channel, user name, password; click the Network Settings button, you can set the network of the device, including IP, subnet mask, default gateway (ONVIF protocol devices cannot make network settings).
  • Page 21 Figure 3.8 network settings 5. Hotkey settings Configure all channels by one key. 6. Equipment list display area This area displays the discovered devices. 7. Delete Select the device has been configured, click Delete, you can delete the device 8. Clear Clear all configured channels 9.
  • Page 22 Figure 3.9 Copy to 11. Up and down keys Click the device in the list, click up and down buttons to move the device up and down. 12. Configuration Status Configuration status of each channel, including not configured, connected, not online 13.
  • Page 23 Figure 3.10 Playback 1. Playback control 2. Time display 3. Synchronous 4. Video type 5.Time schedule options 6.search by time/switch mode 7.Channel Selection 8.Date selection 9. Storage device selection 【Playback control】See detail in below chart: Button Function Button Function Play/Pause Backward play Slow play Fast Rewind...
  • Page 24 Note: play under frame by frame, the playback status should be paused firstly. 【Operation tips】show function of the key that cursor placed. Special functions： Local zoom：When the system is in single-window full-screen playback mode, you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom.
  • Page 25 [Stop] regardless of what state, select "Close" button, the channel will not output an alarm signal 3.5.6 PTZ control *PTZ control is a little different between hybrid mode & full digital mode: Digital channel – the digital channel need link PTZ, the remote device should connect with PTZ and with protocol correctly set also.
  • Page 26 then click on the button, you can add a preset point. 2.Deleting preset Then click on the delete preset. ， Enter a number in 3.Preset Then click on the head will rotate to the ， ， Enter a number in preset position.
  • Page 27 In Figure3.14 input point between the cruise number , then click the point between the cruise, complete the deletion 3.The point of the call between the cruise line In Figure3.14 points in the input box cruise input point between the cruise, and then click the [start] between cruise key.
  • Page 28 3.5.7 coaxial control The coaxial control function enables the video recorder to transmit the control signal to the front end camera through the coaxial cable. The DVR can control the front camera’s PTZ ,menu and other function through the control signals. Coaxial control function requires the front camera also supports coaxial control function Figure 3.17 coaxial control 3.5.8...
  • Page 29 Figure 3.18 Image color 3.5.9 Output Adjust Adjust TV output area parameters. You can use the desktop shortcut menu to choose “Output Adjust”.
  • Page 30 Figure 3.19 Output Adjust 3.5.10 Logout Logout shut down the system or reboot up. You can use the desktop shortcut menu Figure 3.20 Logout/Shutdown/Reboot the system 【logout】Quit the menu. Offer password next entrance. 【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint.

  • Page 31: Main Menu

    4. Main menu Main menu navigation Main menu Sub menu Function Record Config Recording configuration, recording type, recording time, etc. Record Detect backup devices, formatting backup device, backup Backup function selected files Playback Video search, video player, video file Motion Detection Set channel, device type, and set the linkage parameters: Arming Video blind...

  • Page 32: Record Function

    RS485 Set protocol, address, baud rate, data bits, stop bits, parity RS232 Set the serial port function, baud rate, data bits, stop bits, parity Tour Set touring mode and interval Set the specified hard disk drive to read and write, to read-only Storage disc, set to redundant disk, clear the data, data recovery and other operations...
  • Page 33 hours of continuous recording. [Main menu]> [record]> [record config]. Note: The normal recording equipment, installation of a hard disk with at least one set to read-write disk (detailed operation, please refer to section 4.5.1) Figure 4.1 video settings [Channel] to select the appropriate channel number for the channel set, selectable settings for all channels unified whole;...

  • Page 34: Event Function

    View chapter "3.5.3 video playback." 4.2.3 video backup By setting the backup device video file to an external storage device. Note: Before backup files, you need to install the files stored to accommodate storage devices. Backup is terminated; it has been copied to a storage device files can be played back independently.
  • Page 35 alarm input alarm, intelligent analysis and abnormality. 4.3.1 motion detection By analyzing the video image, when the system detects a mobile signal, motion detection alarm is initiated, and the linkage functions. Note: The front-end equipment and this equipment need to enable this feature. Advanced button same to the right mouse button.
  • Page 36 Figure 4.4 area settings [Period]: You can also set the alarm time from Monday to Sunday every day 4 time periods, other time will not trigger motion detection alarm information. As shown in FIG. Figure 4.5 time period [MD Interval]: between two alarms generate alarm information shortest time interval can be set between 0 and 600S.
  • Page 37 Figure 4.6PTZ Linkage [MD interval]: After the alarm ends, the length of time to continue the local recording can be set between 10 and 300S. [Show message] on the local host screen, pop-up dialog box prompts warning information; [Send Email]: When an alarm is triggered, sends an alarm message to the specified mailbox, mailbox settings.
  • Page 38 Figure 4.7 video blind Digital channels cannot be used to set the sensitivity. Which is a mixed-mode or full simulation mode can set the sensitivity. Sensitivity level is divided into six kinds, namely: minimum, low, medium, high, very high, the highest. Setting method: refer to chapter "4.3.1."...
  • Page 39 Figure 4.8 video blind Video loss alarm configuration, please refer to 4.3.1 motion detection section. 4.3.4 Alarm input When the device gets an external alarm device alarm signal, it will start alarm function. * Alarm input, mixed-mode / full analog channel mode and use the same digital channel mode, the function is turned on, if set to normally open, you only need to plug the alarm terminal on the local end of the alarm inputs, alarm information will be generated , but also the corresponding linkage setting function.

  • Page 40: System Settings

    Figure 4.10exception handling [Event Type] in the drop-down box to select the detection of abnormal [Enable] ■ Means open the exception handling feature. [Show Message] screen on the local host screen, pop-up warning message prompt dialog box; [Buzzer] when an alarm occurs, the device sends a "tick" sound long ring. [Send Email]: When an alarm is triggered, sends an alarm message to the specified mailbox, mailbox settings.
  • Page 41 Figure 4.12 general settings [Time Zone]: The default is CMT +8 [System time]: set the system time manually. [Date Format]: provide Year Month Day/ Month Day Year/ Day Month Year three formats. [Date separator]: Set the preview screen displays the date when the delimited format, provide a "-""."...
  • Page 42 Figure 4.13 Daylight Saving Time (weeks) setting Figure 4.14Daylight Saving Time (days) setting. 4.4.2 Encoding settings * When the product is set to mixed mode / full analog channel mode, the system will be set up in the encoding setting function, encoding settings can only function in an analog channel encoding settings.
  • Page 43 Figure 4.15 encoding settings [Channel] to select the channel number; display the corresponding channel information; [Compression] coding standard H.264MP [Resolution] as obtained from the front-end device connected to the encoded information; [Frame Rate] can be adjusted, according to the acquisition front-end coding prevail, DVR, and front-end equipment will take effect after adjustment;...
  • Page 44 Figure 4.16 network settings [DHCP Enable]: The DVR is connected to the router which DHCP is open; then DVR will automatically obtain an IP address. [IP Address]: The IP address of the DVR is used to login network, the default is: 192.168.1.10.
  • Page 45 Figure 4.17 network services [PPPoE settings]: Figure 4.18 PPPoE  Enable: Anti ■ means enabled.  Enter the ISP (Internet Service Provider) to provide the PPPoE username and password, restart the system after saving. After starting the DVR will automatically establish a network connection to the PPPoE mode, after the success, IP [IP address] will be automatically modify the dynamic WAN IP address obtained.
  • Page 46 Figure 4.19NTP settings It required install the NTP service on the PC. Enable: Anti ■ means, select Enable, set to take effect. Server IP: Enter installed NTP server PC IP; Port: The default NTP port 123, the port settings can be based on actual NTP server; Update Period: the same NTP server check interval, the default is 10 minutes.
  • Page 47 Figure 4.20 Email settings  [SMTP server]: Log mailbox to query entry method SMTP server in mailbox settings.  [Port]: The mail server port number;  [Need SSL]: consistent with the mailbox configuration, you can log in to view the mailbox into the mailbox settings.
  • Page 48 Figure 4.21IP rights settings [DDNS] Figure 4.22 DDNS settings It is the abbreviation of dynamic domain name server.  [Domain name]：Provide the domain name registered by DDNS.  [User name]：Provide the account registered by DDNS.  [Password]：Provide the password registered by DDNS. When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit.
  • Page 49 Note：The DNS setup must be configured correctly in the network setup. [FTP settings] FTP is used when there is an alarm generated, or the alarm linkage video, capture pictures, you can upload to a specified FTP server specific video and capture pictures. Figure 4.23FTP settings [Enable]: Anti ■...
  • Page 50 Figure 4.24ARSP [Type]: Select the DNS [Enable]: Anti ■ means, select Enable, set to take effect; [Server Ip]: IP address of the DDNS server; [Port]: Device port number corresponding DDNS server "service listening port"; [User Name]: The user name of the device login DDNS server; [Password]: The password corresponding to the user name;...
  • Page 51 Figure 4.25 alarm center [Protocol type] GENERAL; [Enable] ■ means selected, select Enable, set to take effect; [Server Name] IP address of alarm server; [Port] port number of the device; [Alarm report] reported anti ■ means, reported to the police information to the server;...
  • Page 52 [Enable]: Anti ■ means, select Enable, set to take effect; [Type]: Dial type, default automatic [Wireless AP]: 3G access point, the default can [Dial number]: 3G dial number, the default can [User name]: Dial 3G username [Password]: dial the user's password [IP address]: The IP address of the dial-up number to get [UPNP] UPNP protocol can forward automatically on the router.
  • Page 53 Figure 4.28 WIFI settings [Search]: Click [Search] button to search out available within the current range of the wireless device; [Enable]: Anti ■ means to select the Enable before setting; [DHCP Enable]: Anti ■ means, select Enable, the device will automatically get WIFI in the IP;...
  • Page 54 [CLOUD] Check the cloud services, male cloud service is enabled, the user can visit http://calDVRview.net/ Figure 4.30 Cloud  【Enable】 Select it to make sure abnormal function workable 4.4.5 GUI Display Configure the video output parameters including time display, record status, transparency, resolution etc.
  • Page 55 in the surveillance window.  【Alarm Status】means the selective state. Display the system alarm status in the surveillance window.  【Transparency】Choose the background image transparency. The range is 128~255.  【Resolution】set display resolution. 4.4.6 RS485 Figure 4.32 RS485  [Protocols]to select the protocols (e.g.: Dahua); ...
  • Page 56 Figure 4.33 port settings  【Function】Common serial port is used to debug and update program or set up specific serial port.  【Baudrate】Choose the corresponding baud rate length.  【Data bits】Include 5-8 options.  【Stop bits】Include 2 options.  【Parity】Include odd, even, mark, space, default is none. 4.4.8 Tour Set the patrol display.

  • Page 57: Advanced

     【Alarm Tour Type】set the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm ends, when alarm link to tour, system will auto shift to six-view after alarm finished. Remark：at preview mode, click upper right icon can turn on / off tour（...
  • Page 58 2. There is no limit in the user and user group. You can add or delete the user group according to user definition. The factory setup include: user\admin. You can set the team as you wish. The user can appoint the purview in the group. 3.
  • Page 59 Figure 4.37 Modify password [Add user]: Set new user name, password, notes, owning group, permissions and other information, can add up to 64 user names. Figure 4.38 Add user [Add Group]: Set the group name new user group, notes, permissions and other information.
  • Page 60 Figure 4.39 Add group [Delete User]: delete the selected user, the user cannot delete the registry. [Delete Group]: delete the selected user group, when the group contains a user group cannot be deleted. Figure 4.40 delete group 4.5.3 Online user...
  • Page 61 To check the information of network user that connected with local device, also can tick the selected user to break up connection,（make √ at the box），then the user will be frozen after connection stopped, and will not log in until device reboot. Figure 4.41 Online user 4.5.4 Import / Export...
  • Page 62 Figure 4.42 import/ export 4.5.5 Upgrade Figure 4.43 Upgrade 【Upgrade】choose USB interface. 【Upgrade file】choose the upgrade file. 4.5.6 AutoMaintain The user can set the time to auto reboot and auto delete file.
  • Page 63 Figure 4.44 auto maintain 4.5.7 Restore The system restore to the default. You can choose the items according to the menu. Figure 4.45 Restore 4.5.8 Channel manage Channel management including digital channel, channel status, and channel mode.(note: under full-analog mode, there is only channel mode selection)
  • Page 64 Mixed mode/ full-digital mode Figure 4.46 channel manage Digital channel Figure 4.47digital channel  【Channel】select channel title  【Enable】Open digital channel, tick enable, then can do related settings  【Time Sync】Tick it means the time of this channel and device is the same. ...
  • Page 65 will be ok.  【Add】click add will come out below page to add new device Figure 4.48 Remote access configurations  【Configure Name】device is with default configure title, user can revise it if necessary；  【Device Type】 3 types: IPC、 DVR、 HVR， user can choose as what you like, default is IPC；...
  • Page 66 Figure 4.49 network settings Channel Status: Channel status is to show the status of the entire digital channel when there is what existing, status including Max Resolution, This Resolution, and Connection Status. The channel status as 4+2 mode: Figure 4.50 Channel Status Remark: when the current resolution is over the max resolution that the channel supported, then a red “X”...

  • Page 67: System Info

    Figure 4.51Channel Type Remark: this series of product with full analog channel mode, hybrid mode and full digital mode, and different model with different channel mode, user can shift the mode freely if necessary. System Info Display the hard disk information, including HDD info, code stream statistic, log info, version info.
  • Page 68 Figure 4.52HDD info Tips： ○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user needs to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks, then install a new one.
  • Page 69 To search log information base on the set search mode. Log information include: system operation, configuration operation, data management, alarm affair, recording operation, user management, and file management and so on. Set the time section to look up and click the look up button. The log information will display as a list.

  • Page 70: Shut Down System

    Shut down system Refer to chapter 3.5.8.

  • Page 71: Remote Cloud Operating Instructions

    5. Remote Cloud Operating Instructions Cloud surveillance Cloud technology allows the device to achieve one step to Internet, which greatly facilitates the customers to monitor the public network. The technology access the device through the serial number. * Note: Support for cloud technology equipment required to be in the public domain is available within the cloud monitoring.
  • Page 72 Figure 5.2 cloud technology interface Device Management: Mainly used to add devices to be monitored, click Add, to add serial number of the device. Figure 5.3 device management Figure 5.4Add device * Note: the user name in Figure 5.5 is the user name of monitoring equipment; device password refers to the appropriate device user's password.
  • Page 73 Figure 5.5 surveillance screen 5.1.4 Log in by device Figure 5.6 log in by device Enter the serial number of the device to monitor and verify the code after the direct monitoring equipment. Figure 5.7 surveillance screen...

  • Page 74: Faq And Maintenance

    6. FAQ and maintenance If your problem is not the content of the following, please contact your local customer service staff or call the customer service consulting headquarters, we will be happy to serve you. Q: When turned on, the DVR does not start properly A: Possible reasons: ...
  • Page 75  Update the different program with the origin program files.  The video files to look up are covered.  The recording is not on. Q: The local video is not clear. A: Possible reasons are as followed:  The image quality is too bad. ...
  • Page 76 Q: I cannot login via web or CMS. A: Possible reasons are as followed: The system is Windows98 or Winme. We recommend updating to windows 2000sp4 or higher Version or installing the software for low edition.  ActiveX is hold back. ...
  • Page 77  There are some problems for specific program edition, Please update the program. Q: Alarm is not working. A: Possible reasons are as followed:  The setting of the alarm is not correct.  The connection of the alarm is not correct. ...

  • Page 78: Maintenance

    A: Possible reasons are as followed:  There is no other device exist in the Local area network  The subnet masks setting incorrectly on Network settings. Q: The snapshot at alarm function was enable, why not catch picture A: Possible reasons are as followed: ...

  • Page 80: Appendix Ⅰ Remote Controller Operation

    Appendix Ⅰ Remote controller operation Serial Name Function number Multi-window Same function as Multi-window button in the front button panel Numeric button Code input/number input/channel switch 【Esc】 Same function as【Esc】button in the front panel Direction button Same function as direction button in the front panel Record control Control the record Same function as “Record mode”...

  • Page 81: Appendix Ⅱ Mouse Operation

    Appendix Ⅱ Mouse operation *Take right hand as an example The mouse in USB connection is supported. Operation Function Double click one item in the file list to playback the video Double click the playback video to zoom in or out the Double left click screen Double click the channel to make it full screen display...

  • Page 82: Appendix Ⅲ Hard Disk Capability Calculation

    Appendix Ⅲ Hard disk capability calculation Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk lines connection. 1、 Hard disk capability There is no limit for recording machine. We recommend 120G~250G size to keep better stability.

Table of Contents