Sony PEG-UX50 Operating Instructions Manual page 34

01US01COV.book Page 33 Friday, June 20, 2003 6:29 AM
Performing a hard reset
If the soft reset does not solve the problem, you will need to perform a hard
reset to restart your CLIÉ handheld.
Notes
• All records and add-on applications stored on your CLIÉ
• Perform a hard reset only if a soft reset does not solve the problem.
1
Slide down and hold the POWER/HOLD switch.
2
Press the RESET button gently with the stylus, and then
release the stylus.
3
Wait more than three seconds after the palm POWERED
screen is displayed, and release the POWER/HOLD switch.
A message, "Erase all data?" is displayed.
Sony Personal Entertainment Organizer PEG-UX50/UX40 X-XXX-XXX-11 (1)
handheld will be erased by performing a hard reset. (All records
and add-on applications stored on Internal media will be retained.)
However, you can restore your CLIÉ handheld data if it was saved in Power
Saving mode (page 30).
You can also restore it if you have made a backup on your computer via the
®
HotSync operation.
Note
Keep the POWER/HOLD switch held down.
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
33