Digital Watchdog Compressor DW-CP16 User Manual page 55

DW-CP16 Compressor™ User Manual
SNMP V1/V2 uses the "Community" name as password to authenticate identity. "Read
Community" is the password for server to get information from devices. "Write Community" is
the password for server to edit values on devices. The default is "public" for Read Community
and "write" for Write Community. Of course, you can set any other password as your read/write
community.
You can enable V1, V2 or both. Click Apply after setup is complete.
SNMP V3 uses account/password for authentication. "Security Name" is the account name to be
used with your "Password". The default security name is "public" and the password must be at
least 8 characters long. You also can set any other security name or password.
Click "Apply" after setup is complete. You may now install and run the SNMP management
software on the computer server.
SNMP Trap Usage:
SNMP traps enable notifications from devices. Devices may send message to the management
server whenever significant events occur such as cold start, warm start and authentication failure.
The manager will get the information immediately and take action if necessary.
Cold start means device reboot by power disconnection. Warm start means device reboot by
firmware without power disconnection. If there other parties attempt to connect to the device
Digital Watchdog® 55 www.digital-watchdog.com