6 Setup with the integrated display and adjustment unit
Service - Data transmis-
sion
Info
Optional settings
26
First of all, enter the previous address of the sensor to be modified
(factory setting 0), then you can enter the selected HART address in
the range of 01 - 15 in the menu "New address". Make sure that no
address is assigned twice.
With instrument versions with integrated RS232/Ethernet interface,
a manual data transmission to a VEGA Inventory System server can
be triggered, for example, for test purposes. Requirement is that a
respective event was configured in advance via PACTware/DTM.
In the menu item "Info" the following information is available:
•
Sensor type and serial number
•
Date of manufacture and software version
•
Date of last change using PC
•
Instrument features
•
MAC address (with interface option Ethernet)
•
Instrument key (PSK) for DTM remote access (with interface
option Ethernet/RS232)
Additional adjustment and diagnostics options are available via the
Windows software PACTware and the suitable DTM. Connection can
be made optionally via the built-in standard interface or one of the
optionally offered interfaces (RS232/Ethernet). Further information
is available in chapter "Parameter adjustment with PACTware", in
the online help of PACTware or the DTM as well as in the operating
instructions manual "RS232/Ethernet connection". An overview of
the standard functions and their adjustment options can be found in
chapter "Functional overview" in the "Supplement".
6.3
Menu schematic
Information:
Depending on the instrument version and application, the highlighted
menu windows are not always available.
VEGASCAN 693 • 15-channel HART signal conditioning instrument