Vega VEGASCAN 693 Operating Instructions Manual page 24

6 Setup with the integrated display and adjustment unit
Service - Display lan-
guage
Service - Access protec-
tion
Service - Access protec-
tion - PIN
24
•
Reset to default: with only a few exceptions, all settings will be
reset to default. Exceptions are: Host name, IP-addr., subnet
mask, time, language.
•
Reset on measurement loop: The settings of the selected meas-
urement loop will be set to default. The measurement loop is
deactivated and the TAG name reset to default.
In the menu item "Display - Language", the requested display lan-
guage can be adjusted. The following languages are available:
•
German
•
English
•
French
•
Spanish
•
Russian
•
Italian
•
Dutch
→
Carry out your settings via the appropriate keys and save with
[OK].
The signal conditioning instrument can be locked and the data trans-
mission encrypted as protection against unauthorized changes of the
adjusted parameters. The following versions are possible:
•
Access protection of the on-site adjustment via keyboard by
means of a PIN
•
Access protection of the DTM adjustment via the USB/Ethernet/
RS232 interface by means of a password (can be only activated
via DTM)
•
Encryption of the DTM data transmission with connection via
Ethernet/RS232 interface
•
Access protection of the integrated web server by means of a
password (can be only activated via DTM)
Modification of parameters through the instrument keyboard can be
avoided by activating a PIN. The measured value display and display
of all parameters is still possible.
VEGASCAN 693 • 15-channel HART signal conditioning instrument