Panasonic DMR-XS350EB Service Manual page 24

Hide thumbs Also See for DMR-XS350EB:
Table of Contents

Advertisement

7.1.2.
Special Modes Setting
Mode name
Rating password
The audiovisual level setting password is
initialized to "Level 8".
Service Mode
Setting every kind of modes for servicing.
*Details are described in "7.1.3. Service
Mode at a glance".
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is
ON, execute " Forced disc eject " after
releasing Timer REC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Child lock/unlock
Set or release "Child Lock".
NTSC/PAL system select To switch PAL/NTSC alternately.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is
ON, execute
releasing Timer REC or EXT-LINK.
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Item
Description
"Forced
Power-off"
LCD display
The display before execution leaves. When the power is off, press
The display before execution leaves. While the power is on (E-E mode),
Display in P-off mode.
after
Display following the then mode.
24
Key operation
Front Key
Open the tray, set DRIVE SELECT
to DVD, and press [REC] and
[PLAY] simultaneously for 5 sec-
onds.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
[STOP] and [CH UP] keys simulta-
neously for 5 seconds.
Press [OK] and [RETURN] by
remote
controller
simultaneously
until [X-HOLD] is displayed.
press [STOP] and [OPEN/CLOSE]
simultaneously for 5 seconds.
Press [Power] key over than 4 sec-
onds.
When the power is ON, press
[STOP], [POWER] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.
NOTE:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents