Page 1
CE20WLD25-B INSTRUCTION MANUAL Colour television Problems with set-up? Please read this Instruction book before using your television. Call 0870 240 7475 We wish you many hours of pleasure from your new television.
Contents Remote Control Buttons ..........................2 LCD TV ...............................2 Preparation ..............................3 Safety Precautions .............................3 Before Switching On Your TV ........................4 Switching The TV ON/OFF ......................... 5 Navigating the Menu System ........................5 Initial Settings .............................. 5 Basic Operations ............................6 Everyday Operation ...........................
Remote Control Buttons = Stand By = Expand / /WIDE = No Function = Cursor Up = Mix, = No Function = Cursor Right = Teletext = Info = Time / subtitle on/off in the digital mode 0 - 9 = Direct Program S ELECT INFO / Red button = Page Up / Sound Menu...
Preparation Safety Precautions For ventilation, leave a space of at least 10 cm free all Please read the following recommended safety pre- around the set. To prevent any fault and unsafe situa- cautions carefully for your safety. tions, please do not place any objects on top of the set. 1.
specified by the manufacturer or have the same speci- Before Switching On Your TV fications as the original one. Unauthorised substitutions Power Connection may result in fire, electrical shock, or other hazards. 9. Servicing IMPORTANT : The TV set is designed to operate on 220-240V AC 50Hz.
3- Use “ Switching The TV ON/OFF ” or “ ” button to highlight. 4- Press “ ” or “ ” buttons to change the settings. To switch the TV on: Press OK to set as default. Your TV will switch on in two steps: 5- To exit the menu or return from sub-menu screen, press M.
To seach for analogue channels, select “Yes”. The Basic Operations menu below is displayed to search for analogue chan- You can operate your TV using both the remote nels. control and onset buttons. Operation with the buttons on the TV Volume Setting -”...
information by pressing “INFO” button and by press- Press directly the programme number to reselect single digit programmes. ing this button again you can close this window. Note : In Analogue mode please press -/-- button for ELECT RONIC PROGRAMME GUIDE(Now&Next) S aturday 21/8 13:48 the programme selection IT V News...
• If you press “INFO” button you can see the detailed Digital teletext is sometimes broadcast at the same help information easily. And by pressing “INFO” but- time as normal broadcasting. ton again you can exit Help menu. 1. Press the button.
IDTV Menu System “Select” item on Channel List menu is highlighted by using button. The IDTV menu can only be shown when watching Then the name and number of the selected channel Digital terrestrial broadcasting. Press the “ ” will be displayed in the top-left and top-right of the button to turn IDTV on while TV is in analogue mode.
only the favourite channels are navigated. To set a favourite you should highlight the “Favourites” item at bottom of the Channel List menu. CHANNEL LIST BBC ONE button to highlight the “Favourites” 1. BBC ONE Use the 2. BBC TWO item at the base of the screen and then, in turn, high- 3.
ADD NEW CHANNELS: This tuning menu consists of two parts: Please ensure aerial is plugged in. Do you want to start automatic search? Automatic Search Manual Search Y es Installation Press the “OK” button to start installation. After search Add New Channels Automatic Search is completed for digital channels, a message asking...
Configuration This function enables or disables the favourite chan- nel list mode. See Channel List menu Favourites on Press the "M" button to display the Main Menu and page 12. button twice to highlight Configuration, then button to turn on/off favourite mode. If press the “SELECT”...
IDTV tunes to each frequency that have been stored Highlight the Timers line by pressing button in its database and looks for the new software. and press the “SELECT” button to display the Timer menu. S oftware Upgrade S earching for upgrade. Please wait, or Main Menu press MENU to c ancel.
If timer action occurs while the TV is watched, the TV Detailed information about Sound, Picture and Fea- switches to the selected channel. When timer ex- ture menus are in AnalogueTV Menu System section pires, the TV switches to the channel which it is on page 19.
Analogue TV Menu Map FEATURES SOUND Sleep Timer Volume Language English Balance Child Lock Sound Mode Stereo EXT2 Output Effect Menu Colour Gray Back : Menu Exit : TV Back : Menu Exit : TV PICTURE INSTALL Picture Mode Bright Programming Brightness A.P.S.
Picture Menu Analogue TV Menu System Sound Menu PICTURE Picture Mode Bright Brightness SOUND Contrast Volume Colour Sharpness Balance Sound Mode Stereo Back : Menu Exit : TV Effect Back : Menu Exit : TV Picture Mode button, select Picture Mode. ...
Features Menu Install Menu FEATURES Sleep Timer Language English Child Lock EXT2 Output Menu Colour Gray INSTALL Back : Menu Exit : TV Programming A.P.S. Txt. region West Europe Sleep Timer Program Table select “Sleep Timer”. • By pressing Back : Menu Exit : TV ...
Standard • By pressing select Standart. ” button to change the standard to B/G, , • Use “ ” / “ D/K, I or L/L'. Colour System • By pressing select Colour System. • Use button to change the colour system to PAL, SECAM or AUTO.
button to select the other letters. By pressing the INSTALL YELLOW button, you can store the name. Move: Programming Txt. Region West Europe Select the programme that you want to insert by navigation buttons. Press the GREEN button. By navi- Back : Menu Exit : TV gation buttons, move the selected programme to the...
Change PIN Personal Preference • By pressing button , select Change PIN. By pressing this button, you may adopt the previous settings that you had stored before. • Use “ ” button to change the PIN code. After press- Menu System in AV Modes ing “...
Connect Peripheral Equipment • To discover solutions on quiz and games press “ ” • At times it is convenient to hold a page of text.Press Via The Scart “ ” to hold a page. The page will be held on screen The TV has 2 Scart sockets.
Camera And Camcorder No Picture To Connect To AV Input Is the aerial connected properly? Are the plugs con- nected tightly to the aerial socket? Is the aerial cable Connect your camera or camcorder to EXT-3 input of damaged? Are suitable plugs used to connect the the TV.
Connect Peripheral Equipment HEADPHONE AUDIO AUDIO IN VIDEO IN VIDEO ANT.IN CAMCORDER SATELLITE RECEIVER ANTENNA Peripheral Equipment Connections POWER CABLE AUDIO LINE OUT (L, R) AUDIO INPUT (L, R) VIDEO INPUT S-VHS INPUT SCART 2 SCART 1 ANTENNA HEADPHONE CI Slot English - 24 -...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...
Page 27
DURING WARRANTY. electrical supply for which it has not been properly adjusted. 2: If your SANYO equipment proves faulty during the Unauthorised repairs or modifications, which have not period of guarantee, take it or send it back to the been expressly approved by the manufacturer, shall dealer who originally supplied it together with this render this guarantee null and void.