Table of Contents
Advertisement
7.5.2 Reinstalling optical pick-up unit
TOP PREVIOUS NEXT
The optical pick-up unit is factory adjusted. Do not touch the adjustment screw.
1. Reassemble the disassembled parts in the reverse order of disassembly.
2. When reinstalling the traverse assembly on the main unit after installing the optical pick-up
unit, make sure to remove the solder from each of the two laser short lands on the flexible
cable.
Caution:
Remove the solders completely; otherwise the laser diode won´t emit light.
After replacing the optical pick-up unit, check the quality of images played back and make
optical adjustment.
TOP PREVIOUS NEXT
Advertisement
Table of Contents
