Table of Contents
Advertisement
4-2. ADJUSTMENT METHOD
Item Number 00 of device GEO
This explanation uses H-Position as an example.
1. Select "GEO 00 HPS" with the 1 and 4 buttons.
2. Raise/lower the data with the 3 and 6 buttons.
3. Select the optimum state. (The standard is 1F for PAL reception.)
4. Write with the
WRITE.)
5. Execute the writing with the - button. (The WRITE
display will be changed to red color while excuting, and back
to SERVICE.)
GEO
00
601S 1.0C
GEO
00
601S 1.0C
GEO
00
601S 1.0C
Downloaded from
www.Manualslib.com
[MUTING]
button. (The display changes to
HPS
1F
SERVICE 50
59
7F
0
000A
HPS
1F
WRITE
50
59
7F
0
000A
Written with [MUTING]
HPS
1F
SERVICE 50
59
7F
0
000A
Write executed with [0]
manuals search engine
Use the same method for all Items. Use 1 and 4 to select the
adjustment item, use 3 and 6 to adjust, write with
then execute the write with -.
Note : 1. In
2. For adjustment items that have different standard data
GREEN
Adjusted with [3]
and [6] buttons.
GREEN
RED
The WRITE display
then the display
returns to a green
SERVICE.
– 33 –
[WRITE]
, the data for all items are written into memory
together.
between 50Hz or 60Hz, be sure to use the respective
input signal after adjustment.
KV-XF29N90/XF29N93
RM-914
[MUTING]
,
Advertisement
Table of Contents
