Calling Another Cordless Handset Or Corded Base; Transferring An External Home Call To Another Cordless Handset Or Corded Base; Three-Party Conference Call; Setting The Dial Mode - Motorola L704CBT User Manual

Doc Title : User's Guide
Model : Motorola L70×CBT

6.20.1 Calling another cordless handset or corded base

1. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select INTERCOM.
2. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select the cordless handset or corded base you want
to call.
3. Press <MENU> to make the call.
4. Press <HOME> to hang up.
NOTE
If the cordless handset is not within the valid operation range, this function may not be available.
During an intercom call, you will hear an alert tone if there is an incoming external call. You need to press
<HOME> to hang up the intercom call before answering the incoming external call.

6.20.2 Transferring an external home call to another cordless handset or corded base

1. During an external home call, press <MENU>.-Your call will be put on hold.
2. Press <VOL+> or <REDIAL/VOL-> to select the cordless handset or corded base you want to call.
3. Press <MENU> to make the call.
4. When the other cordless handset answers by pressing <HOME> or <SPEAKER>, or the corded base answers
by pressing <HOME/SPEAKER>, press <HOME> on the calling cordless handset to transfer the call. If the
other cordless handset or corded base does not answer, press <MUTE/CLEAR/BACK/X> on the calling
cordless handset to talk to your caller again.

6.20.3 Three-party conference call

1. During an external home call, press <MENU>. -Your call will be put on hold.
2. Press <VOL+> or <REDIAL/VOL-> to select the cordless handset or corded base you want to call.
3. Press <MENU> to make the call.
4. When the other cordless handset or the corded base answers the intercom call, press <MENU> on the calling
cordless handset to set up the conference call.
5. Press <HOME> on any cordless handset to end a three-party conference call and leave the other cordless
handset or corded base engaged with the caller.
NOTE
During an external call, pressing <HOME> or <SPEAKER> on any cordless handset will join in the call and set up
a conference call.

6.21 Setting the dial mode

The default dialing mode is suitable for your country and network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select SETUP BS.
2. Press <MENU> to select DIAL MODE.
3. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select TONE or PULSE.
4. Press <MENU> to save the setting.
NOTE
If pulse mode is selected, press <*/TONE> to switch from pulse to tone dialing temporarily when dialing out. After
the call is ended, the dial mode will change back to pulse automatically.

6.22 Setting the flash time

The default flash time is suitable for your country and network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select SETUP BS.
2. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select FLASH TIME.
3. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to the flash time you want. (8 options are available: 90,
100, 110, 250, 300, 400, 600 and 700MS)
4. Press <MENU> to save the setting.

6.23 Setting the area code

1. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select SETUP BS.
2. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select AREA CODE.
3. Press <MENU> and enter the area code.
4. Press <MENU> to save the setting.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
31 of 40