Table of Contents
Advertisement
Doc Title
:
User's Guide
Model
:
Motorola L70×CBT
3.
Press <MENU> and then display will show the Cellular name(s) of paired device(s).
NOTE
Display will show NO PAIRED if there is no device paired up.
4.
Press <+/-> to select the desired cellular device.
For an active device (shown in active devices list) and connected:
5.
Press <MENU> and corded base displays REMOVE?
6.
Press <MENU> to confirm. The corded base displays REMOVED.
For an active device (shown in active devices list) but not connected:
5. Press <MENU> and then <+/-> to select CONNECT or REMOVE.
If you select CONNECT:
Press <MENU> and the telephone will start to connect the selected cellular device.
If you select REMOVE:
Follow the steps as above.
For an inactive device (not shown in active devices list) and there is still free slot in active devices list:
5.
Press <MENU> and then <+/-> to select ADD ACTIVE or REMOVE
If you select ADD ACTIVE:
Press <MENU> and display will show DEVICE ADDED, and then the telephone will start to connect the selected
cellular device.
If you select REMOVE:
Follow the steps as above.
For an inactive device (not shown in active devices list) but there is no free slot in active devices list (already two
active devices):
5.
Press <MENU> and then <+/-> to select REPLACE or REMOVE.
If you select REPLACE:
6.
Press <MENU> and then <+/-> to select a device on the active list to be replaced.
7.
Press <MENU> and display will show DEVICE ADDED, and then the telephone will start to connect the
selected cellular device.
If you select REMOVE:
Follow the steps as above.
NOTE
․
When the connected cellular is removed, the corresponding <device #1 icon> or <#2 icon> will be off.
․
When the disconnected cellular is connected, the corresponding <device #1 icon> or <#2 icon> will be on.
․
When the cellular is removed, the device name will be removed and EMPTY will be displayed instead in the
paired devices list.
3.3.2 Replacing a paired device
If you have already paired up four Bluetooth enabled mobile devices, you will need to replace one of them if you
would like to pair up another device. Follow the steps below to replace and pair up a new device.
1. Press <MENU> and then <+/-> to select BLUTOOTH.
2. Press <MENU> and then <+/-> to select SETUP CELL.
3. Display will show 4 CELLS MAX., and then REPLACE?
4. Press <MENU> to confirm. Display will show the four Cellular names of the paired devices.
5. Press <+/-> to select the cellular device you would like to replace.
6. Press <MENU> to confirm. Display will show REMOVED, and then CELLULAR READY?
7. Refer to section 3.2 to proceed with the next steps.
NOTE
When pairing up new cellular, the connected cellular will be disabled temporarily.
3.4
Active devices
Only devices on the active devices list can establish a Bluetooth connection with the telephone base. Although two
paired devices can be connected to the telephone base, only one Bluetooth mobile phone can be on a call at a
time.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
16 of 40
Advertisement
Table of Contents
