Zte Blade A510 User Manual page 45

Connect to a WPS network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to
the access points which support WPS.
You can use one of the following methods to connect your phone to a wireless
network using WPS.
Method one: WPS button (recommended)
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Push Button.
4. Press the WPS button on the access point and the access point will recognise
your phone and add it to the network.
Method two: PIN number
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Pin Entry.
4. The WPS PIN number displays on the screen. Enter the PIN number into the
access point's setup page.
After entering the PIN number, your phone automatically finds the access point and
configures the connection.
NOTE:
For detailed information about the WPS feature of the access point, please refer to
its user documents.
45