Table of Contents
Advertisement
X. Replacing O-rings
Replace the two O-rings if damaged or at least once per year.
1) Use the O-ring Remover tool
provided to lift and remove
the O-rings.
2) Carefully clean O-ring grooves
and O-rings before installation.
3) Install O-rings by stretching
and lifting O-ring into the
groove. Do not roll the O-ring
or allow it to twist.
4) Apply a small amount of silicone lube on your finger tip and wipe
it around the O-rings. Wipe off excess lubricant. The o-ring
surface should have shiny, wet appearance.
13
Advertisement
Table of Contents
