Advertisement
XG-NV1E
XG-NV1EA
Note :
1 The eccentric cam is used for convergence adjustment. This means that the cam's turning and the linear
movement are not always uniform.
2 This model is not equipped with the LCD image adjustment mechanism. This is because the dichroic
prism is used for image formation. When the LCD panels all get into the best focus, the images are
almost completely converged.
Convergence and Focus Adjustments Mechanism
TOP VIEW
Lock screw "a"
Notch and hole "a"
(Use an eccentric
screwdriver.)
FRONT
SIDE VIEW
Eccentric cam
(X direction adjustment)
Eccentric cam
(Y direction adjustment)
R•B adjusting plate
R•B-LCD
R-LCD
Z
B-LCD
X
θY
Lock screws "c"
Notches and holes "c"
(Use an bladed screwdriver.)
Eccentric cam
(θZ direction adjustment)
Y
X
θZ
SIDE VIEW
G-LCD
Notch and hole "b"
(Use an eccentric
screwdriver.)
X
θY
Z
Lock screw "b"
(θY direction)
Notches and
holes "c"
(Use on eccentric
screwdriver.)
Lock screw "d"
(convergence adjustment)
R•B-LCD panel
mounting screws
18
G-LCD panel
mounting screws
X
θZ
Y
G-LCD
G adjusting plate
Advertisement
Chapters
Troubleshooting
