Advertisement
3. Removing the rear cabinet and video terminal cover
3-1. Remove the two screws off the rear cabinet and the screw from the static ground lead. Pull up the cabinet
and disconnect the speaker connector (SP). Now the rear cabinet is free.
3-2. Remove the four screws off the video terminal cover. Detach the cover.
Make sure the bimetal lead terminals are at the bottom
of the boss a and rib b .
Rib
3-1
Rear Cabinet
b
(SP)
Video Terminal Cover
a
Boss
13
XG-NV1E
XG-NV1EA
3-2
Advertisement
Chapters
Troubleshooting
