Advertisement
Main Menu
Driving Position Memory System
Touring Model
Your Acura has a memory feature
for the driver's seat and outside
mirror positions.
The seat and outside mirror positions
ca n be stored in separate memories.
The power lumbar position cannot be
stored in the seat position memory.
You select a memorized position by
pushing the appropriate button or
using the appropriate remote
transmitter (Memory 1 or Memory2).
94
Instruments and Controls
Table of Contents
Storing a Driving Position in Memory
Store a driving position only when
the vehicle is parked.
1.
Turn the ignition switch to ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is the ON (II)
position. You can recall a
memorized position with the
ignition switch in any position.
2.
Adjust the seat to a comfortable
position (see page
Adjust the outside mirrors for best
visibility (see page
84
).
3.
Press and release the MEMO
button on the control panel. You
93
).
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current positions of the driver's
seat and outside mirrors are now
stored.
MEMO BUTTON
MEMORY BUTTONS
Advertisement
