Advertisement
Main Menu
Turn Signal, Headlights
Turn Signal and Headlights
1.
Turn signal
2.
Off
3.
Parking and indicator lights
4.
AUTO
5.
Headlights on
6.
High beams
72
Instruments and Controls
Table of Contents
Turn Signal
Push down on the
−
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
Rotating the switch
Headlights
−
on the left lever to the ''
position turns on the parking lights,
taillights, instrument panel lights,
side-marker lights, and rear license
plate lights.
Turning the switch to the ''
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder chime when
you open the driver's door.
When the light switch is in either of
these positions, the Lights On
indicator comes on as a reminder.
This light remains on if you leave the
light switch on and turn the ignition
switch to ACCESSORY (I) or LOCK
(0).
High Beams
''
lever back until you hear a click. The
blue high beam indicator will come
on (see page
to return to low beams.
To flash the high beams, pull the
''
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
To turn on, pull the
−
61
). Pull it back again
Advertisement
