Table of Contents
Advertisement
3.5.5 RSTP Configuration
DVW supports STP and Rapid STP function. RSTP function only available in WDS Master and
Slave mode. STP/RSTP can avoid the path looping in the network, and it also can provide
wired/wireless path redundancy.
If you need to use this function, please enable the RSTP function of the interface on all DVW
devices in the network.
Bridge Priority
Each bridge is assigned a priority when they are running STP. After the
devices exchange BPDUs, the lowest priority value becomes the root
bridge. Select a number that is a multiple of 4096 and the range are
between 0 and 61440.
Hello Time
Enter the time for the root of the Spanning Tree topology sends hello
message. For example, if the hello time is 2, the root of the Spanning
Tree topology sends a "hello" message to other network devices every
2 seconds in the network. The range is 1~10 seconds.
Forwarding Delay
Enter a waiting time for the device before checking the topology
change or not. The range is 4~30 seconds.
Max Age
If the device's waiting time for receive a hello message is over the Max
Age, then it will look itself as a root. The range is 6~40 seconds.
3-50
Description
Chapter 3 Featured Function
Factory Default
32768
2
15
20
Advertisement
Table of Contents
