Table of Contents
Advertisement
3.3.1.6 UDP Mode
Compare with TCP communication, UDP communication doesn't need request message before the
session has been established. So after user configure the remote IP address and port information,
the device will start to transmit the data. You can use unicast or multicast way to transmit data
between the host computer and serial device.
Forward Table
Enable
Specify whether the forward information is enabled.
Local Port
Specify the local listen port of DVW device for the device which uses to
establish the connection.
Begin IP Address
Specify the beginning of destination IP address.
End IP Address
Specify the end of destination IP address.
Remote Port
Specify the port number of the Ethernet device.
3-24
Description
Chapter 3 Featured Function
Factory Default
Uncheck
None
None
None
None
Advertisement
Table of Contents
