Pair Connection Mode - Delta DVW SERIES User Manual

DVW Series Industrial IEEE 802.11 a/b/g/n Wireless AP/WDS/Client/Gateway User Manual
Aging Time
Specify the time for DVW device to force pack the received serial data
into the same data frame.
Notice:
Before you configure the settings of Aging Time, please
remember check the Enable item, otherwise the Aging Time
doesn't be applied.

3.3.1.7 Pair Connection Mode

Pair Connection Master and Slave modes connect two DVW devices over a network. The serial
device can connect to a DVW device, and two DVW can use wired Ethernet cable or wireless way to
connect each other. Then two serial devices can overcome the distance limitation of serial interface.
Pair Connection Master Mode
Operation Mode
Display the operation mode of serial port.
Alive Check Time
Specify how long the DVW device sends a packet for checking the
connection still alive.
Destination IP
Specify the IP address for the destination DVW device with Pair
Connection Slave mode.
Description
Description
Factory Default
Disable/
1000 (ms)
Factory Default
Fixed
30
None
3 - 2 7