Preparing For Installation - LG LUTD4919SN Installation Manual

Preparing for Installation

Tools needed
Phillips screwdriver Flat-blade screwdriver
Level
Pipe wrench (2)
(one for support)
Parts Provided
Template (1) Anti-tip bracket kit (1)
Anchor sleeves (6)
Materials You May need
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural and LP gases
• Flexible metal appliance connector (
Never use an old connector when installing a new range.
• Flare union adapter for connection to gas supply line (
• Flare union adapter for connection to pressure regulator on range (
• Liquid leak detector or soapy water
• Lag bolt or / " O.D. sleeve anchor (for concrete floors only)
1
2
1
Open-end or
adjustable wrench
Lag bolts (6)
/ " or / " NPT x
3 1
4 2
/ " Nut driver Pliers
4
Drill Safety glasses
Parts not Provided
4-Wire cord or
3-Wire cord
(UL approved 40 or 50
AMP)
/ " I.D.)
1
2
/ " or / " NPT x / " I.D.)
3 1 1
4 2 2
/ " NPT x / " I.D.)
1 1
2 2
INSTALLATION 15
Tape measure
Gloves
Strain relief
(For conduit
Installations only)