Maintenance Monitor; Set Clock - Curtis enGage IV Manual

2.6.4 Changing Parameters Within Menu System

2.6.4.1 Maintenance Monitor

Starting from the main menu, choose "Maint Monitors" then "Reset
All".
Return to the main menu by utilizing the up / down arrows on panel
and select "Exit".
2.6.4.2 Metric / English
Starting from the main menu, choose "Metric / English" then
"Metric / English" again. Once the left button is pressed to select
this choice, a box will appear around the E / M portion of the item.
Utilizing the up / down arrows on the right side of panel, enter E or M.
Once the desired choice is made, press the select button on the left side
of the panel to accept the selection.
Return to the main menu by utilizing the up / down arrows on panel
and select "Exit".

2.6.4.3 Set Clock

Starting from the main menu, choose "Set Clock" then "Set Clock"
again. Once the left button is pressed to select this choice, a set of "up
arrows" will appear under the hour digits on left portion of the item.
Utilizing the up / down arrows on the right side of panel, enter the
desired time in hours. Then press left button on front panel to accept
the data. The "up arrows" will then move to the minutes portion of the
time. Utilizing the up / down arrows on the right side of panel, enter
the desired time in minutes. Once the desired choice is made, press
the select button on the left side of the panel to accept the data.
Return to the main menu by utilizing the up / down arrows on panel
and selecting "Exit".
page 7 Curtis enGage™ IV Manual