Lincoln Electric ACTIV8 Operator's Manual page 28

C-3
K484
K910-1
K910-2
Gun Receiver Bushing (for guns
K1500-1 with K466-1 Lincoln gun connec-
tors; Innershield and Subarc guns)
Gun Receiver Bushing (for guns
with K466-2, K466-10 Lincoln gun
K1500-2
connectors; Magnum 200/300/400
guns and compatible with Tweco®
Gun Receiver Bushing (for guns
with K613-7 Lincoln gun connec-
K1500-3
tors; Magnum 550 guns and com-
patible with Tweco® #5)
Gun Receiver Bushing (for gun
K1500-4
with K466-3 Lincoln gun connec-
tors; compatible with Miller® guns.)
K1546-2
Incoming Bushing for Lincoln
K586-1
Deluxe Adjustable Gas Regulator.
K283
Wire Feed Speed Meter
ACCESSORIES
Jumper Plug Kit
Ground Clamp
Ground Clamp
#2-#4)
Conduit
ACTIV8™
Includes: 14 pin circular
connector with jumper for
leads 2-4. For use in power
sources for turning the weld
terminals "ON" at all times.
Includes: One 300 Amp
Ground Clamp.
Includes: One 500 Amp
Ground Clamp.
Includes: Gun receiver bush-
ing, set screw and hex key
wrench.
Includes: Gun receiver bush-
ing with hose nipple, set screw
and hex key wrench.
Includes: Gun receiver bush-
ing with hose nipple, set screw
and hex key wrench.
Includes: Gun receiver bush-
ing with hose nipple, set screw
and hex key wrench.
Includes: Feed Plate Incoming
Bushings connect directly to wire
conduit (not included), for use in
boom system, long distances, or
large payoff packages. Bushings
can be used with any wire conduit
(K515 or K565). For 1/16-1/8 in
diameter wire.
NOTE: T10642-325 Flex Tube
Required with K1546-2
Includes: Deluxe Gas Regulator
for Mixed Gases, Adapter for CO
and 10' (3.0m) Hose.
Includes: A wire feed speed
meter with digital display.
C-3
2