Page 2
Keep hair, loose clothing, fingers and all parts of the body away from all moving parts. The Revolution was designed for use on hard surfaces only such as grouted tile, stone, or concrete as per the instructions and recommendations written in this manual. Any deviation from its proper use or purpose and the consequential damage that may occur is the sole responsibility of the end-user.
Turn on the extractor to engage the vacuum. Make sure the bottom of the Revolution is flush with the surface to be cleaned to insure proper suction. Squeeze the trigger to release the solution and move the Revolution at a moderate rate overlapping just enough to insure complete coverage.
Inspect the stainless steel mesh filter after the quick disconnect clean if necessary. Remove the Revolution from the solution hose and check the extractor for a normal flow of solution. Try to spin the arm by hand. If it doesn’t move take the revolution to a qualified service center to replace or rebuild.
Need help?
Do you have a question about the REVOLUTION and is the answer not in the manual?
Questions and answers