Advertisement
•
Use both hands to control the wand.
•
Do not allow the hose to come in contact with the hot muffler.
•
Do not touch the nozzle or water spray while operating.
Water spray must never be directed towards any electric wiring or directly
towards the pressure washer.
•
Only approved hoses and nozzles should be used.
•
The trigger gun must not be jammed in position during operation.
•
Never tie knots or kink the high pressure hose.
Do not use damaged high pressure hoses.
•
All hose connections must be properly sealed.
A thermal relief valve is provided to protect the pump from overheating if the spray
gun is closed for an extended length of time or the nozzle becomes plugged. However
it is only intended to be used as a backup system and every effort should be made
to ensure that you pull the spray gun trigger to allow water flow so that there are no
blockages in the system.
To prevent accidental discharge of high pressure water, the safety latch on the trigger
should be engaged whenever the pressure washer is not in use.
The engine and pump on your pressure washer will often improve performance after
a break-in period of several hours.
Portable Pressure Washer
5
Advertisement
