Introduction Android IP Video Phone UTT-800 Overview With Attachment Item Function Power supply for telephone. Power Adapter Network Cable Used to access network for the phone. Make phone calls with the phone’s basic functions. Handle Handle Line Connected with the handle and the phone.
Phone component descriptions Function Search key. Tap the key and you can enter the search interface. Menu key. You can browse and accomplish all functions of the phone through pressing this key. Return key. Press this button in the detailed interface, it will return to the previous interface;...
Page 7
Confirm key. Delete key. R/Send key. Use the key to dial the last call number. It also could be used to make a phone call by sending a phone number. Navigation key. Menu key. Phone book. Tap to enter the contacts interface. Call log.
The Installation of backplane Set the telephone in horizontal The back plate is horizontally placed in the telephone at the bottom, and makes the phone and joint part of the two screws tightened, right now its steady level placed on the desktop. Vertically hang The back plate is upright placed in the telephone at the bottom, and makes the phone and joint part of the two screws tightened, right now its steady vertical...
Page 9
(Left first) Input: 220V AC DC Power Interface Output: 12V DC (Left second) Specification RJ45, connect it LAN Network interface computer. (Left third) Specification RJ45, connect it WAN Internet interface to network. (Right third) Specification RJ11, connect the PSTN Normal phone general public...
Name Meaning USB interface. Connect it to USB disk. (Left first) Handset interface. Connect the handset. (Center) Interface for high-definition HDMI interface. audio and video. (Right first) Note: 1. Put the handle line into the handle interface according to the interface illustration picture.
Page 11
Long press: Long press the idle desktop. After that, an option box could be popped up, and then you can do more according to the prompt. Long press one list such as a list of contact list. After that, another option box could be popped up, and then you can do more about this list according to the prompt.
Slide your hand on the screen upward or downward slowly to move the interface on the screen. On some kinds of screen such as idle desktop, you can switch the desktop just by moving your fingers on the screen to left or right. Dragging your finger to slide will not select or activate anything on the screen.
Enter symbol, tap this key to switch to next line. Status Bar All of the status information about Android IP Video Phone UTT-800 is displayed on the top of the screen. You can click on the notification icon in the ...
idle screen or drag down the drop-down list with your fingers to enter the notification panel to further review and deal with all of the information. Status bar Meaning Displays that the network connection is Network successful. Tap the icon directly into status (successful) the network settings.
Page 15
Indicates that there are several new New record unread phone recordings. ...
Main Screen Android IP Video Phone UTT-800 will go directly to the main screen after rebooting. The main screen contains three idle interfaces. Each one can display some programs shortcuts. You can switch the desktop just by moving your fingers on the screen to left or right.
Page 17
The application program interface If you want to delete application shortcuts on the idle interface, you can long press the shortcut, and then put it into the dustbin at the bottom of the interface. (Note: Let it go just as the icon and the dustbin turned red as is shown at the following picture.) ...
The Application of Android Video PhoneUTT-800’s Function: Click this icon, and it will switch to pre-dial interface. You can make some phone calls through the screen or keyboard. Phone Has the function of sending and receiving e-mail. When an account has been configured successfully, you can send and receive your e-mail on the phone and this account will automatically sync the contacts to the mailbox account.
You can set your own time and the alarm will remind you at your appointed time. Alarm Clock It contains the Call settings, Basic settings ,Advanced settings, VOIP and so on, you can configure some settings in the corresponding menu.(Android system settings) Settings View photos stored on the phone, or through the USB storage device storing photos or videos, you can enter the photo gallery...
Enter into the calendar and you can view the accurate date. Calendar Enter the call log and you can view all call records. You can also view the "Incoming Calls", "Outgoing Calls" and "Missed Calls" records by pressing the menu key. Call log Ping box is the system's built-in toolbox of network testing tool;...
Page 21
It controls four functions: DND, Call forward, Auto answer, Call firewall. You can make some settings quickly just by clicking the button to turn on or turn off the function. Idle screen display: Call set: This widget shows the network connection status and the registration status of each line.
Page 22
up, tap "Folders" and enter to the "Select folder" list, select the appropriate file to add to the desktop: folder: You can move the application shortcuts on the desktop to the new folder. Notes: It will show recently added content's title, tap the title to view the detailed information.
information. contacts: Contacts with phone numbers: It will show the contact which has the number and do not show the contact which has no phone number. Phone set System Tapping "Phone set" can directly enter the default window "System". It displays the current system information state.
IP address Displays the IP address of the current network model. Net Mask Displays the Subnet Mask of the current network model. Displays the default gateway of the current network Gateway model. Displays the primary DNS server address of the Primary DNS current network model.
Manual interface Configuration Meaning DHCP You can select to use DHCP, which means whether to use the DNS to connect network assigned by the DHCP server. Manual IP: Input your assigned IP address. NetMask: Input your assigned subnet mask. Gateway: Input your assigned gateway. Primary DNS: Input your assigned DNS server address.
PPPoE interface Configuration Meaning PPPoE dial Username: Input your assigned PPPoE Username. Password: Input your assigned PPPoE Password. Auto login connection: Whether to automatically connect PPPoE on boot. Auto failure connection: When connect failed whether to automatically connect PPPoE. Enabled PPPoE: Whether to enable PPPoE. After the parameter configuration is completed, if you do not select "enable PPPoE", then you can click on the "save"...
QoS Settings Configuration item Meaning Use QoS: Enable/Disable QoS. Set QoS: Set the QoS parameter values. The general level is 0x00. Port Tap "Network" ----> "Port", after selecting or modifying the default settings click "Save" button to save successfully. Port Settings ...
Configuration item Meaning Port Media initial port(10000-60000): Set the telephone’s media initial port. This port is distributed to dynamic allocation. Media port quantial: Set the maximum number of allocated RTP port, the default is 200. Stun Tap "Network" ----> "Stun", after selecting or modifying the default settings click "Save"...
Page 29
Account page 1 Configuration item Meaning Account SIP register: Enable/Disable register. Disable register, Enable register. Server: Set your SIP server address. It supports the address in the form of domain name.. Phone number: Input the phone number assigned by your VoIP service provider. Phone will not register if there is no phone number configured.
Page 30
Account page 2 Display name: Configure the display name, it allows the English alphabet input (does not support Chinese). Server Name: Configure the SIP register server name. Server port: Configure the SIP register server port. Register timeout(s): Configure the server register timeout(s), default 60 seconds.
Tone") Recommend:Use the default configuration. Enable uri convert: When you send URI it will convert # to %23. Enable DNS SRV: Configure whether to enable RFC2782 protocol edition. Set to make quotation mark to display name as the phone sends out signal, in order to be compatible with server.
Telephone interface Configuration Meaning Phone DND: Enabled the "DND", the phone will not allow incoming phone calls, but the notification about missed calls will be displayed at the status bar. Call waiting: Set whether to enable the call waiting function. Default dialing: Set the default call mode of the phone, Audio or Video.
Dial interface Configuration item Meaning Dial Use E164: Enable/Disable E164. After it is enabled, it will directly dial numbers according with E164 rules. End with #: Enable/Disable. After enabling the function, input the number end with "#" in the non-pre-dial mode, it will directly dial the phone number.
Service interface Configuration item Meaning Service Call forward: Enabled/Disable Call forward function. (You can select "Always" , "No answer" , "Busy" and "Close forward") Forward number: Set the forward number for each SIP line. Voicemail: Set the voicemail number for each SIP line.
Screen saver interface Configuration item Meaning Screen saver Mode: Enable/Disable. After enabling this function, the LCD screen will be the state of the screen saver mode after the specified time. There are three types of screen saver ("Disabled", "Album" and "Clock") for you to choose.
Hibernate interface Configuration item Meaning Hibernate Use hibernate: Enable/Disable. After enabling this function, the LCD screen will be the state of the hibernate mode after the specified time. Hibernate timeout: Input the waiting time after enabling the hibernate mode, the default unit is minute.
Configuration item Meaning Display Animation: Set the window animation mode, there are three kinds of mode ("No animations", "Some animations" and "All animations") for you to choose. Brightness: Regulate brightness of screen display. Sound Tap "Phone settings" ----> "Sound" interface. After configuring the parameters, you can click "Save"...
Volume Tap "Sound" ----> "Volume" interface. After configuring the parameters, you can click "Save" button to save successfully. Volume interface Configuration item Meaning Incoming call volume: Adjust the volume size of Volume incoming call. Notification volume: Adjust the volume size of notification.
Language interface Date time Tap "Phone set" ----> "Date time" interface. After configuring the parameters, you can click "Save" button to save successfully. Date time interface Configuration item Meaning Date time settings NTP server: Configure SNTP server address of the phone to get the current time.
There are three types for you to choose ("Year - Month - Day", "Day - Month - Year" or "Month - Day - Year"). Manual set time: You can manually set the current date and time. Maintain Tap "Phone set" ----> "Maintain" ----> "Update" interface. After configuring the parameters, you can click "Save"...
Manual upgrade: Click, Immediately upgrade. Account: Input the upgrade server by use of the account. Password: Input the upgrade server by use of the password. Previous page: click "Previous page" to switch. Menu password Tap "Maintain"---->"Menu password" interface. After configured the parameters, you can click "Save"...
Reset factory interface Configuration Meaning Reset factory Reset phone: Click "Reset phone" to reset. Reboot Tap "Maintain"----> "Reboot" interface. You can click "Reboot" button to pop-up "reboot" dialog box, click "OK" to reboot the phone, click "Cancel" will have no operation. Reboot interface ...
Audio Touch "Phone Set" ----> "Audio", enter the detailed interface. Audio Touch "Audio"----> "Audio" interface. After configuring the parameters, you can click "Save" button to save successfully. Audio interface Configuration item Meaning Audio First audio codec: Set the first priority in the use of voice coding.
you can click "Save" button to save successfully. Audio param interface Configuration item Meaning Audio param G729 payload length: Set G729 codec payload length. DTMF payload type: Set DTMF payload type, values between 96 and 127. ILBC payload type: Set ILBC payload type, values between 96 and 127.
Video param screen Configuration item Meaning Video param First video codec: Set the first priority in the use of video coding. Second video codec: Set the second priority in the use of video coding. Third video codec: Set the third priority in the use of video coding.
Bandwidth screen Configuration item Meaning Bandwidth Media Bandwidth: Set receiving video bandwidth in video calls. You can choose 9 kinds of video bandwidth types ("64Kbps", "192Kbps", "256Kbps", "384Kbps", "512Kbps", "768Kbps", "1Mbps", "1.6Mbps", or "2Mbps). Video Resolution: Set video encoding resolution in a video call.
Page 47
Delete selected status interface Configuration item Meaning Call firewall Enable the firewall: Whether to enable the firewall. After enabling the function, there will be a notification note in the status bar. When a number is added to the firewall, the telephone will automatically reject all incoming calls of this number, at the same time there won't be any note.
Phone Application Phone This terminal support two dialing ways: regular telephone and VoIP. Dialing Dialing on the dialer view You can directly dial a phone number. 1. Press the phone icon in the launcher. 2. Select the line to dialing (SIP1, SIP2, SIP3, SIP4). 3.
Page 49
Touch the Contacts icon in the launcher, or enter the dialer view, tap the "Contacts" tab, select a contact you want to call, a context menu will be shown, select the "Call contact" and select a line to dial. Answer the ringing 1.
Page 50
Ringing view (Known contact) 3. In the ringing view, you can choose "forward", "Video", "Audio" or "Reject", just press the corresponding button or the soft key to choose. Call options Video call You can make a video call by the following way: 1.
"Talking record" content of the Record application, as the Figure: Hold/resume the call During the talking, tap the "Hold" button to hold the current call, then we cannot hear each other. The state "Holding" will be shown in the current contact card, you can tap the "Resume"...
Page 52
Telephone contact address book. A contact can store more than one number, email and house information. Search contacts You can search the contacts on the VOIP by the contacts’ first letter (Chinese names are searched by its first letter of the alphabets). 1.
Page 53
Contacts interface Delete a contact Two methods: Method one: 1. Tap "Contacts" button. 2. Tap the "Delete" or press and tap "Delete Manager". 3. Select the contact you want to delete, and then tap the "Picture Trash" to delete or you can bulk delete, by tapping the right button of the contact you want to delete , to make the state checked just as 4.
Page 54
4. Tap "Ringtones" and select the ringtone that you want in the pop-up box. 5. Tap "OK" button. When the contact calls you, it will play the ringtone just set. Add contacts to the firewall 1. Tap "Contacts" button. 2. Long press the name of a contact and select "Add to firewall", then you can reject all calls about that number.
or SD card Contacts Group You can add contacts to a group specified, and then you can easily send a message to all members of the group. Tap “jiantou” to switch to Contacts group interface (You can also switch to the full screen).
Page 56
Interface of all calls To view missed calls When you have some missed calls, the status bar will show us the missed call icon , open notification panel and touch "Missed call" to view all of the missed call. Open Call log you can tap “jiaotou” or have the Phone /Contacts tab opened, and then touch the Call log tab.
box that opens. You can remove it which you selected from call log. 2. Clear by type: Tap the Delete Manager button, you can select the call logs that you want to delete; you can also select “Remove all” to clear all call logs; or you can press "Menu"...
Page 58
selected speed dial button. The figure: Speed Dial Management Editing Speed Dial Open your "Memory Key", touch & hold a null button, then touch "Edit". Add a contact name, number, call the line (SIP1/2/3/4), and call type (video / voice). When you are finished, touch "OK". Deleting Speed Dial Open your "Memory Key", touch &...
Network Phonebook Android IP Video Phone UTT-800 terminal can download contact the information stored by the users from the Internet. If you use Network Phonebook, you can follow these steps: 1. Configure parameters related to the network phonebook in settings.
settings screen, then touch "Number to dial for checking voicemail", enter the number to listen in voice messages. View and Listen in voice messages On the MWI screen, you can view count of unread voice messages and count of read messages when there were voice messages, and touch listen icon corresponding line to listen in voice message.
Page 61
Click on next, will be taken to the account type interface, a total of three can choose: POP3, IMAP and Exchange. Introduction of the Exchange configurations: Gmail account Contact interface "menu" menu, "more"-" account "-" add account" Input your user name and password to click on the "next" Domain\Username : gmail.com\username(**@gmail.com)...
"Account settings" representative to get all the Settings of the comprehensive to together, it has already been mentioned, here will not repeated. Calculator Easily view voice messages, quickly listen in voice messages. Touch the MWI icon on the home screen or in the Launcher, you can view voice messages information.
panel" either by selecting the "basic panel" after touching the "menu" button, or sliding your single finger from left to right. sin, cos, tan To calculate a numerical value of trigonometric function(sin, cos, tan) π To input the value of π. To calculate the factorial of a numeric.
where you can add a memo needed. View a memo You can check a memo by touching it after opening the notepad. Edit a memo Touch "Note pad", select the memo needed to be modified, touch the "menu" button and choose "edit text" to enter the notepad editing screen, after modification completion, press the return key to be saved, or press the "menu"...
tap "Go" or to search in the input box. If the contents of the webpage are too many, you can quickly click the screen twice, and then it will zoom in or zoom out. When you press the button on the phone, it will show you all functions of the browser.
be backed, and then touch "OK" to start. You can also touch "Cancel" button to cancel the backup. Close the Recorder You can exit and turn off the recorder either by touching the return key or click "Quit". Digital clock By using the digital clock, you can know the date and time more easily.
Gallery You can browse photos and videos easily. Browse Pictures Tap "Gallery" application, open a gallery album, press "Option" key, select "Slideshow", then the screen will display the pictures in the form of slide mode. You can also manually view each picture by sliding the screen from left to right or click the left (right) arrow on the screen.
File Manager You can easily organize multiple files. The view of the File Manager as the Figure 1 and Figure 2 are as follows Figure 1 Figure 2 "Figure 1" is showing files as icon, "Figure 2" is showing files as a list, the form of the list will display the operation time of the file (need to be checked in the settings).
operations. After your taping on the "Icon/List" button, it will show files as different view. By taping the "Refresh", you can refresh the view. By taping the "More" button, you can do more operations such as "New Folder", "New File", "Paste", "Search", "APK Manager", "Settings", "Multiple/Cancel", and "Exit", as shown in the Figure 3: Figure 3 New Folder: You can create a new folder.
Photo process Tap the "Menu" button when you view the photos, select "spin", you can rotate left or right, and it will be automatically saved; or select the "pruning", and then trim operation is completed, click "save "button to save, or click the" discard "button to unsaved.
then it can be played. Delete music files Long press an artist, an album or a song, then select "Delete" in the popup box, you can achieve the purpose of deleting music files. Pay attention to that the deleted files are permanently deleted and cannot be recovered. Search music files Long press a piece of music file, select the "Search"...
long time, there may be inaccurate, then set the "upper left", "upper right" and "left down" and "right down" and "middle" five icons through the screen calibration procedures to adjust the screen, and let the screen in a state of accurate.
Android system setting Basic settings Tap "Settings" to enter settings interface to configure. Tap "Settings", the default selection is" Basic settings", select "WAN" to switch to "WAN" interface. Configuration item Meaning Display telephone’s IP, gateway, Netmask, the primary Status DNS and the backup DNS that are using currently. ...
Ethernet Network: After enabling, the phone will try to connect network. configuration Ethernet configuration: Tap the Ethernet configuration button, it will pop up a "Configure Ethernet device" dialog, and then do the following configurations, after configuring, you can tap "OK" button to make settings take effect.
Page 75
Notification ringtone: Set notification ringtone of the telephone. Tone Set Audible touch tones: Enable/Disable. After enabling the function, when you use a dialing keyboard it can play sound. Audible selection: Enable/Disable. After enabling the function, when you select the screen it can play sound.
The second period end time: Set the second period end time. Configuration management Tap "Settings", and then select "Configuration management" to switch to Configuration management interface. Configuration item Meaning Auto provision Server: Input the upgrade server address. Protocol: Select the protocol used by the automatic upgrade, Include: FTP, HTTP and TFTP.
Server: 192.168.1.249 Image: home.tar.gz Protocol: ftp User: ad Password: ad Version: Phone version, this version can be arbitrarily input. But the version number cannot be same with the telephone version number, otherwise it will not upgrade. Server: Upgrade the server address that is using. Image: The file that need to be updated, the suffix name must use tar.gz.
current time through the sntp server. Configuring the phone to get the sntp server Automatic timing address at the current time. server Settings Set the current date. Set the date Select the current time zone. Select time zone Set the current time manually. Set the time When enabled, the time will be displayed in a Use the 24-hour...
Page 79
SIP set Configure the corresponding registration parameter of each sip account, such as sip server address and so on, then click "OK" button after configuration is completed. Configure the corresponding sip line of each line Line set key on the phone keyboard. Voice Configure voice parameters in the process of calls, such as voice coding, whether to enable VAD, etc.
Page 80
choose not to configure, the system will automatically configure). Server port Configure the SIP register server port. Register expire time Configure the server register timeout(s), default 60 seconds. If the registration time of the server (seconds) required is greater or less than the time of the phone to configure, telephone can automatically modify to the time limit that server recommended, and register again.
Page 81
Enable display name Set to make quotation mark to display name as the phone sends out signal, in order to be compatible quote with server. Enable CLIR Enable/Disable CLIR Enable/Disable SIP STUN; Use stun Stun Server Configure the SIP STUN server address. Configure the SIP STUN server port.
"Auto reject video". Set the first priority in the use of video coding. First video codec Second video codec Set the second priority in the use of video coding. Third video codec Set the third priority in the use of video coding. Set the size of a single video packet during the Video packet size video call...
Page 83
calls of this number, at the same time there won't be any note. Click to view all the firewall numbers successfully added, at the same time, you can click a firewall number to delete in check process; you can also add and delete by the menu option.
Outside line prefix: Input the prefix number Hot line: Set the hotline number for each SIP line. Hot line Hot line time out: Set the waiting time of the hotline number after hooking off, if the number is not set, the default time is 0, and then it will immediately call the hotline number.
Set password Set or change the credential storage password Clear credential storage of all contents and reset its Clear storage password. Default configuration password: 123456. Privacy Tap "Advanced Settings" and then select "Privacy" switch to the privacy settings interface. Configuration item Meaning Factory data reset Clear all user information on the phone, and the entire...
SD card and memory Tap "Advanced Settings" and then select "SD card and memory" switch to the SD card and memory settings interface. Configuration item Meaning Total space Display the size of the total storage capacity of the SD card. Available space Show the remaining available storage space size of SD card.
Page 87
Configuration item Meaning Status Display phone status information. My phone number: Display phone number on each line. Mobile network type: Whether successfully or unsuccessfully the phone connect to the network. MAC address: Show the physical address of the phone. Up time: Shows the running time of the phone to boot.
Web page configuration description When both of the SE780 phone and your PC are successfully connected to the network, enter the IP address and the web browser port about your phone as the URL such as "http://xxx.xxx.xxx.xxx:8080/" (8080 is the web browser port.
Basic Status STATUS interface Status Configuration item Meaning Network Shows the configuration information on WAN: Including the IP address and the MAC address. Phone Number Shows the phone numbers provided by the SIP LINE 1-4 servers. The last line shows the version number and issued date.
Page 91
Sip Configuration Configuration item Meaning Choose line to set info about SIP, there are 4 lines to choose. You can switch by [Load] button. Register Shows whether the phone has been registered the SIP Status server, if not, show Unapplied. Server Set the server name.
Page 92
Set expire time of SIP server register, default is 60 seconds. If the register time of the server requested is Register Expire longer or shorter than the expire time set, the phone will Time change automatically the time into the time recommended by the server, and register again.
RFC3261 as default. Set Anonymous call out safely; Support RFC3323 and Privacy RFC3325. Edition Select the special type of server which is encrypted, or has Server Type some unique requirements or call flows. Select DTMF sending mode, there are three modes: * DTMF_RELAY DTMF * DTMF_RFC2833...
Page 94
called in private network. Stun interface Stun Configuration item Meaning Shows STUN NAT Transverse estimation, true STUN NAT means STUN can penetrate NAT, while False Transverse means not. STUN Server Addr Set your SIP STUN Server IP address. STUN Server Port Set your SIP STUN Server IP port.
you can use the ordinary SIP Server to realize penetration to NAT. PHONE DSP interface DSP Configuration Configuration item Meaning The fist preferential DSP codec: First Codec G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARM- The second preferential DSP codec: Second Codec G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARM- The third preferential DSP codec: G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARM- Third Codec The fourth preferential DSP codec:...
The sixth preferential DSP codec: Sixth Codec G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARM- The seventh preferential DSP codec: Seventh Codec G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARM- The eighth preferential DSP codec: Eighth Codec G.711A/u,G.722,G.723,G.729,iLBC,ARM,ARM- Signal Standard Select Signal standard. Configure a dual - tone multi-frequency’s DTMF payload Type effective payload. ILBC Payload Type Set the ILBC load type, value based on 96-127.
Page 97
AUTO PROVISON interface Auto Provision Configuration item Meaning Set FTP/TFTP/HTTP server IP address for SES Address auto update. The address can be IP address or Domain name with subdirectory. Account You can add or delete user account, and change the authority of each user account in this web page.
User Name Set account user name. Set user level. Root user has the right to User Level modify configuration, General can only read. Password Set the password. Confirm the password. Confirm Account Option Select the account and click the Modify to modify the selected account, and click the Delete to delete the selected account.