Important Safety Instructions; Technical Specifications - Televes 5806 Quick Manual

Twin modulator t.ox series

Hide thumbs Also See for 5806:

User manual (32 pages)

User manual (32 pages)

Table Of Contents

Table of Contents

Available languages

TWIN MODULATOR

Important safety instructions

Caution Statements

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Only use attachments/accessories specified by the manufacturer.

10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

Warning

Reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

Safe operation

Should any liquid or object fall into the equipment, please refer to qualified personnel for

service.

Safe installation

Ambient temperature should not be higher than 45°C.

Do not place the equipment near heat sources or in a highly humid environment.

Do not place the equipment in a place where it can suffer vibrations or shocks.

Please allow air circulation around the equipment.

Do not place naked flames, such as lighted candles on or near the product.

Simbology

Equipment designed for indoor use.

The equipment complies with the CE mark requirements.

The product is EAC certified.

Technical specifications

Bandwidth

Input level (75 ohm)

Video

Modulation depth

Differencial gain

Bandwidth

Impedance

Audio

Pre-emphasis

Deviation (1KHz/1.7Vpp input)

Output frequency

Impedance

Output level

Regulation margin

RF output

Level stability

Pa/Pv distance

IF frequency

Frequency steps

C/N (5MHz)

Power supply

General

Consumption 24V

- The Power Supply Unit can power up to 16 Twin Modulator modules.

- Whenever the demand of power exceeds 4A (max. current for each output), it is necessary to distribute it between the two powering outputs of the PSU.

- The technical characteristics described are defined for a maximum ambient temperature of 45°C (113ºF). Forced ventilation is used for higher temperatures.

Inputs/Outputs/Connections description

The unit (Fig. 1) is provided with:

1. RF input

2. RF output + 2 CH TV (module A and module B)

3. Powering BUS connectors

4. Status LED

5. Control BUS connectors

6. Audio / video input signal connector (module A and module B)

7. Programmer / PC connector

Introduction

The TWIN unit features two A/V inputs (modules A and B) which generate two

independent output channels.