Removing The Power Supply Board; Removing The Dvd-Rom Drive - Hitachi DV-P250U Service Manual
Hide thumbs
Also See for DV-P250U:
- Service manual (378 pages) ,
- Operating instructions manual (40 pages) ,
- Operating instructions manual (40 pages)
Table of Contents
Advertisement
Removing the Power Supply Board
1.
Disconnect the two cables and remove the screw from the power supply board.
2.
Then, remove the two screws of the power socket on the rear panel of the machine.
3.
Slightly lift up and take away the power supply board.
Removing the DVD-ROM Drive
1.
Remove the two screws from each side of the DVD-ROM drive, then remove the DVD-ROM drive.
2.
Disconnect the power cable and the IDE cable from the DVD-ROM drive.
32
Chapter 2
Advertisement
Table of Contents
