Removing The Front Panel - Hitachi DV-P250U Service Manual

Hide thumbs Also See for DV-P250U:
Table of Contents

Advertisement

Removing the Front Panel

1.
Disconnect the three cables from the MPEG control board.
2.
Disconnect the cable and remove the two screws from the power supply board.
3.
Turn the machine over, then remove the screw from the bottom of the front panel.
4.
Use a screwdriver into the emergency eject hole to release the screw by clockwise direction from bottom
of the machine, and the DVD-ROM tray will eject gently.
.
5.
Use your finger to slide up the DVD-ROM tray cover, then push the tray inside.
.
30
Chapter 2

Advertisement

Table of Contents
loading

Table of Contents