Transmitter Features; Transmitter Keypad - Radiodetection RD7000 User Manual

Transmitter features

1. Keypad.
2. LCD.
3. Removable accessory tray.

Transmitter keypad

. Power key: Switches the unit on
and off. Opens the transmitter
menu.
. ƒ key: Selects frequency. Menu
navigation key.
. Up and down arrows: Adjusts the
output signal. Scrolls through the
menu options.
7. Measure key: Toggles
measurement display between
volts, current and impedance.
Note: displayed measurements are
based on the currently selected
mode or the attached accessory, if
applicable. Opens a submenu.
Transmitter screen icons
8. Battery icon: Indicates the battery
level.
. Alphanumeric description of
selected operation mode.
10. Standby icon: Appears when the
transmitter is in Standby Mode.
11. Output level: Displays transmitter
output power.
12. Clamp icon: Indicates when a
clamp is connected.
13. DC icon: Appears when the
transmitter is powered from a DC
source.
14. Induction indicator: Appears when
the transmitter is in Induction
Mode.
15. A-Frame: Indicates when the
transmitter is in Fault-Find Mode.
16. CD Mode indicator: Indicates
that the transmitter is in Current
Direction Mode.
17. Voltage warning indicator:
Indicates that the transmitter is
outputting potentially hazardous
voltage levels.
18. Volume icon: Displays the volume
level.
19. Pairing icon (Tx3B and Tx10B
only). For use with RD8000
receivers only.
20. Bluetooth
®
only). For use with RD8000
receivers only.

icon (Tx3B and Tx10B