Using The Menu - Radiodetection RD7000 User Manual

Using the menu

The RD7000 receiver and transmitter menus allow you to select or change system
options. Once entered, the menu is navigated using the arrow keys. Navigation is
consistent on both the transmitter and the receiver. When in the menu, most on-screen
icons will temporarily disappear and the menu options will appear in the bottom left-hand
corner of the LCD. Note that when browsing the receiver menu, the
as left and right arrows. When browsing the transmitter menu the
left and right arrows. The right arrow enters a submenu and the left arrow returns to the
previous menu.
Note: When you select an option and press the Left arrow, the option will be enabled
automatically.
To navigate the receiver menu:
1. First power up the receiver.
2. Press the
3. Use the
. Press the
. Press the
. Press the
Receiver menu options
• VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
• UNIT: Choose metric or imperial units.
• LANG: Select your preferred system language.
• POWER: Set national power frequency: 50 or 60Hz.
• FREQ: Enable or disable individual frequencies.
• ALERT: Enable or disable StrikeAlert™.
• BATT: Set battery type. NiMH or ALK.
• ANT: Enable or disable any antenna mode with the exception of Peak, where
present on your locator.
key to enter the menu.
or arrows to scroll through the menu options.
key to enter the option's submenu.
key to return to the previous level.
key to return to the main operation screen.
12
and keys act
and keys act as